Product Information Document
9 of 12
Product Information Document
Arrayable 2 Way 6.5" Full Range Loudspeaker
for Installation Applications (White)
Install
ATHENS
TCS62-WH
Architecture & Engineering Specications
The speaker shall be of the full range, two-way passive type consisting of one 6" (162 mm) LF driver and one 1" (25 mm) HF compression driver.
Performance specications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine
wave input, shall be at within ±3 dB from 60 Hz to 20 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points,
shall average 100° H x 60° V, rotatable. Nominal impedance shall be 8 Ohms. Power handling shall be 175 Watts continuous, 700 Watts peak.
Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 90 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured
at 1 metre with music program at stated amplier input, shall be 118.5 dB. Dimensions: 224 mm high x 402 mm wide x 198 mm deep
(8.8" x 15.8" x 7.8"). Net weight: 6.9 kg (15.2 lbs). The loudspeaker system shall be the TURBOSOUND TCS62-WH. No other loudspeaker shall be
acceptable unless submitted data from an independent test laboratory veries that the above combined performance / size specications
are equaled or exceeded.
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our
own MUSIC Tribe factory using state-of-the-art automation, enhanced production workows and
quality assurance labs with the most sophisticated test equipment available in the world. As a result,
we have one of the lowest product failure rates in the industry, and we condently back it up with a
generous Warranty program.