Quick Start Guide

12 Quick Start Guide 13TCS Passive series
Mounting and Fixing
The table below summarises the rigging parts or kits required for various applications, and some examples of the possible rigging options are illustrated.
TCS series cabinets are designed with multiple internal rigging points to suit many possible mounting methods in permanent installations. All cabinets can be simply
suspended using optional M8 or M10 shoulder eyebolts coupled to the internal rigging points provided. Remove the appropriate countersunk screws and replace them
with eyebolts, which must have a thread length of at least 18mm. Use the rear rigging point to angle the cabinet for optimum room coverage. Cabinets may be hung
upside down if required. Turbosound WB-20, WB-55 and CB-55 wall and ceiling brackets are optionally available for TCS series cabinets, and these are also compatible
with OmniMount* wall and ceiling brackets which use 60 mm x 60 mm hole spacing.
Model Wall Ceiling Down ll Array Kit Eyebolts
TCS62
WB-20
TCS62-SB
CB-55
TCS62-SB
TCS62-SB
M8 Thread
TCS122 WB-55 CB-55
TCS122-FP
TCS-FK1
TCS-FK2
EB-10-40
TCS152 WB-55 CB-55
TCS152-FP
TCS-FK1
TCS-FK2
EB-10-40
TCS115B
TCS115-FP
TCS-FK3
EB-10-40
TCS Subwoofers EB-10-40
Some typical examples of the possible rigging options are shown here:
Passive
LF
NL4
Input/
Link
1+
1 -
2+
2 -
>
>
>
>
>
>
>
>
1+
1 -
2+
2 -
Barrier
Strip
Input/
Link
speakON* NL4
Barrier Strip
1-
2-
2+
1+
PASSIVE, Input Full Range -
PASSIVE, Input Full Range -
PASSIVE, Input Full Range +
PASSIVE, Input Full Range +
1+ 1- 2+ 2-
Mode Back Panel Connector Internal Schematic
Mode Back Panel Connector Internal Schematic
TCS110B, TCS212B, TCS115B
TCS218B
Parallel
Discrete
LF 1
NL4
Input/
Link
1+
1 -
2+
2 -
>
>
>
>
>
>
>
>
1+
1 -
2+
2 -
Barrier
Strip
Input/
Link
LF 2
LF 1
NL4
Input/
Link
1+
1 -
2+
2 -
>
>
>
>
>
>
>
>
1+
1 -
2+
2 -
Barrier
Strip
Input/
Link
LF 2
speakON* NL4
Barrier Strip
1-
2-
2+
1+
Input SUB -
Input SUB -
Input SUB +
Input SUB +
1+ 1- 2+ 2-
speakON* NL4
Barrier Strip
1+ 1- 2+ 2-
Input SUB 1 +
Input SUB 1 +
Input SUB 1 -
Input SUB 1 -
Input SUB 2 +
Input SUB 2 +
Input SUB 2 +
Input SUB 2 -
1-
2-
2+
1+
Amplier Channel 1
Amplier Channel 2