Product Information Document

8 of 13

Arrayable 2 Way 15" Full Range

Loudspeaker with Dendritic

Waveguide for Installation Applications,

90° H x 40° V Dispersion

Install

ATHENS

TC S 152/9 4

Mounting and RiggingMounting and Rigging

The cabinet is tted with M8 x 8 and M10 x 9 internally-threaded rigging points that allow it to be rigged with optional shoulder eyebolts and

mounted in many dierent congurations in permanent installations. The simplest method of rigging is to use the two M10 rigging points on

the top, and a single pull-back rigging point in the centre of the rear panel. Adjustment of the length of the rear cable allows the cabinet to be

angled for optimum room coverage. Cabinets may also be hung upside down if required.

The cabinet is compatible with industry standard wall and ceiling brackets which use 60 mm x 60 mm hole spacing.

An array of two or more cabinets can be congured using optional TURBOSOUND yplates and inter-cabinet couplers. These are xed to the

cabinet sides through the M10 rigging points, and assembled together in a ‘daisy chain’ fashion to build up the required array. The horns of each

cabinet may be rotated through 90 degrees to optimise the coverage.

Suspension using M10

shoulder eyebolts on top and

one at the rear.

Horizontal clusters using y plates Vertical array using y plates and

and inter-cabinet couplers on top and bottom.

Fly plates

Fly plate

Inter-cabinet

couplers

inter-cabinet couplers on left and right.

Fly plate

Fly plates

Fly plate

Inter-cabinet

coupler

Inter-cabinet

couplers