Product Information Document

10 of 15
Product Information Document
Arrayable 2500 Watt 2 Way 12" Loudspeaker
with Dendritic Waveguide, KLARK TEKNIK DSP
Technology and ULTRANET Networking,
90° H x 60° V Dispersion (White)
Install
ATHENS
TC S122 /96 -AN -WH
Technical Specications
System
Frequency response 50 Hz – 18 kHz ±3 dB
45 Hz – 20 kHz -10 dB
Nominal dispersion 90° H x 60° V @ -6 dB points, rotatable
Maximum SPL 131 dB peak
Crossover type Active
Transducers 1 x 12" (312 mm) LF Driver
1 x 1.4" (36 mm) HF Compression Driver
Limiter Independent HF, LF, peak and rms
Amplier
Maximum output power* 2500 W
Type Class-D
Protection Short circuit, thermal
Connectors
Input/link 1 x Combo Jack/XLR, 1 x XLR
Sensitivity +4dBu or +14 dBu software switchable
Input impedance 40 k balanced
Maximum input level +22 dBu
Ultranet input/link 2 x RJ45
Mains supply Neutrik powerCON 20A†
Controls
DSP Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter
User DSP Functions
Factory EQ presets Positioning, Sound mode, FBQ
Display LCD 128 x 32, blue, backlit
Delay 0 - 300 ms
Equalisation High and low shevling EQ 2 x parametric EQ
Limiter Zero attack input limiter
Presets 20 total presets, 19 user-de nable
Crossover High Pass L-R 24 dB/oct
Protection Lock-out function for all settings
Ultranet Digital Network
Digital processing
A/D conversion 24-bit,44.1/48kHz sample rate
Converter type 24-bit,delta-sigma
System
Signal 16 channels
Latency < 0.9 ms
Frequency response 20 Hz to 20 kHz (+0 / -3 dB)
Dynamic range typical 92 dB
Cabling
Cables Shielded CAT5
Cable length max. 246 ft / 75 m recommended