Quick Start Guide

16
TCS-AN series Quick Start Guide
17
TCS-AN Series Flying Components
Wall and Ceiling Brackets
To install a loudspeaker using Turbosound wall and ceiling brackets, fi rst separate the brackets into their
wall/ceiling plate and speaker plate component parts. Remove the countersunk bolts on the rear panel of
the cabinet. Attach the speaker plate to the cabinet with the bolts supplied. Fix the wall/ceiling plate in the
venue using appropriate fi xings (not supplied). Lift the loudspeaker on to the wall plate and re-assemble
the bracket parts, adjust the vertical angle and tighten all bolts.
Loudspeaker Arrays and Clusters
An array of two or more cabinets requires the use of kits of fl yplates and inter-cabinet couplers, which are
fi xed to the cabinet sides through the M10 rigging points and assembled together in a ‘daisy chain’ fashion
to build up the required array. For all loudspeaker arrays consisting of two or more cabinets:
The number of inter cabinet coupler kits required = the number of boxes – 1, The number of fl yplate kits
required = the number of boxes.
Illustrated here are the components parts available for TCS cabinets:
TCS122-FP (WH)
Fly Plate Kit for TCS122
TCS115-FP (WH)
Fly Plate Kit for TCS115B
TCS152-FP (WH)
Fly Plate Kit for TCS152
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
4 x M10 Bolts
4 x M10 Spring Washers
Contents:
Contents:
2 x Fly Plates
Contents:
2 x Fly Plates
2 x Fly Plates
TCS-FK3 (WH)
Inter-Cabinet Coupler Kit for TCS115B
TCS-FK2 (WH)
Inter-Cabinet Coupler Kit for TCS122 or TCS152
TCS-FK1 (WH)
Inter-Cabinet Coupler Kit for TCS122 or TCS152
2 x ICC
EB-10-40
Eyebolt M10 x 40mm
Contents:
2 x ICC
Contents:
Contents:
2 x ICC
Contents:
1 x Eyebolt