Quick Start Guide

12
TCS Passive series Quick Start Guide
13
Mounting and Fixing
The table below summarises the rigging parts or kits required for various applications, and some examples
of the possible rigging options are illustrated.
TCS series cabinets are designed with multiple internal rigging points to suit many possible mounting
methods in permanent installations. All cabinets can be simply suspended using optional M8 or M10
shoulder eyebolts coupled to the internal rigging points provided. Remove the appropriate countersunk
screws and replace them with eyebolts, which must have a thread length of at least 18mm. Use the rear
rigging point to angle the cabinet for optimum room coverage. Cabinets may be hung upside down if
required. Turbosound WB-20, WB-55 and CB-55 wall and ceiling brackets are optionally available for TCS
series cabinets, and these are also compatible with OmniMount* wall and ceiling brackets which use
60 mm x 60 mm hole spacing.
Some typical examples of the possible rigging options are shown here:
Model Wall Ceiling Downfi ll Array Kit Eyebolts
TCS62
WB-20
TCS62-SB
CB-55
TCS62-SB
TCS62-SB M8 Thread
TCS122 WB-55 CB-55
TCS122-FP
TCS-FK1
TCS-FK2
EB-10-40
TCS152 WB-55 CB-55
TCS152-FP
TCS-FK1
TCS-FK2
EB-10-40
TCS115B
TCS115-FP
TCS-FK3
EB-10-40
TCS Subwoofers EB-10-40
Passive
LF
NL4
Input/
Link
1+
1 -
2+
2 -
>
>
>
>
>
>
>
>
1+
1 -
2+
2 -
Barrier
Strip
Input/
Link
speakON* NL4
Barrier Strip
1-
2-
2+
1+
PASSIVE, Input Full Range -
PASSIVE, Input Full Range -
PASSIVE, Input Full Range +
PASSIVE, Input Full Range +
1+ 1- 2+ 2-
Mode Back Panel Connector Internal Schematic
Parallel
Discrete
LF 1
NL4
Input/
Link
1+
1 -
2+
2 -
>
>
>
>
>
>
>
>
1+
1 -
2+
2 -
Barrier
Strip
Input/
Link
LF 2
LF 1
NL4
Input/
Link
1+
1 -
2+
2 -
>
>
>
>
>
>
>
>
1+
1 -
2+
2 -
Barrier
Strip
Input/
Link
LF 2
speakON* NL4
Barrier Strip
1-
2-
2+
1+
Input SUB -
Input SUB -
Input SUB +
Input SUB +
1+ 1- 2+ 2-
speakON* NL4
Barrier Strip
1+ 1- 2+ 2-
Input SUB 1 +
Input SUB 1 +
Input SUB 1 -
Input SUB 1 -
Input SUB 2 +
Input SUB 2 +
Input SUB 2 +
Input SUB 2 -
1-
2-
2+
1+
Amplifier Channel 1
Amplifier Channel 2
Mode Back Panel Connector Internal Schematic
TCS110B, TCS212B, TCS115B
TCS218B