Quick Start Guide

Quickstart Guide
TCS series
TCS Series Quickstart Guide - Page - 5
TCS series Flying Kits
Flying components are arranged into kits as shown here:
Vertical Arrays
The simplest vertical array consists of two TCS-122 cabinets
or two TCS-152 cabinets flown one above the other and
suspended from eyebolts. The upper box can be inverted in
order to close-couple the HF horns if required as shown
here.
07G0330 ICC-2V kit of two (2) vertical brackets,
includes 4 x M10 x 40mm bolts and 4
x M10 spring washers
07B392 EB-10/18 M10 shoulder eyebolts (3 required)
• Position the cabinets as you would like the cluster to
be assembled. Remove countersunk screws as
appropriate from the sides of each cabinet, and fit a
07A0330 vertical bracket on each side between the two
cabinets using the fixings provided.
• Remove the countersunk screws from the top of the
upper cabinet and fit M10 shoulder eyebolts.
• Use the lower rear eyebolt point as a pull-back to
create the required cluster inclination.