Quick Start Guide

Quickstart Guide
TCS series
TCS Quickstart Guide - Page - 4
TCS Series Flying Components
Wall and Ceiling Brackets
To install a loudspeaker using Turbosound wall and ceiling brackets, first separate the brackets into their wall/ceiling plate and
speaker plate component parts. Remove the countersunk bolts on the rear panel of the cabinet. Attach the speaker plate to the
cabinet with the bolts supplied. Fix the wall/ceiling plate in the venue using appropriate fixings (not supplied). Lift the loudspeaker
on to the wall plate and re-assemble the bracket parts, adjust the vertical angle and tighten all bolts.
Downfill Applications
The TCS-61 can be tight-packed underneath a TCS-152 cabinet to provide downfill coverage
using the SB-61 swivel bracket. First disassemble the swivel bracket into its component
parts. Remove the countersunk bolts from the bottom panel of the TCS-152 cabinet and fit
the section with the elongated holes using the fixings supplied. Remove the countersunk
bolts on the top panel and fit the swivel bracket using the supplied fixings. Re-assemble the
swivel bracket, angle as appropriate and tighten all fixings.
For downfill applications under TCS-122 cabinets use two ICC-61 inter-cabinet couplers.
Remove the four countersunk screws located on the sides of the TCS-61
To use the SB-61 to install the TCS-61 in a ceiling-mount application, separate the
component parts as above, and fix the top section to the ceiling with appropriate fixings (not
supplied). Fit the other half to the TCS-61 cabinet, re-assemble the bracket, angle as
appropriate and tighten all fixings.
Loudspeaker Arrays and Clusters
An array of two or more cabinets requires the use of kits of flyplates and inter-cabinet couplers, which are fixed to the cabinet
sides through the M10 rigging points and assembled together in a ‘daisy chain’ fashion to build up the required array. For all
loudspeaker arrays consisting of two or more cabinets the number of flying kits required = the number of boxes – 1.
Illustrated here are the components parts available for TCS cabinets: