Quick Start Guide

26 27Quick Start GuideIMPACT SERIES
Impact Series Rigging Instructions
Installing the Loudspeaker with
the Supplied WallBracket
The loudspeaker connections are provided
as an integral part of the supplied
WB-5wallbracket.
1. Site the bracket on to the mounting
surface, makingsure there is sucient
free travel vertically and horizontally
to allow fullangular adjustment of
the loudspeaker, and feed the speaker
cables throughthe main bracket
assembly fromtherear.
2. Fix the wall bracket securely to the
mounting surface using appropriate
xings. The correct hole spacing and
bracket orientationare shownhere:
3. Terminate the speaker cable by
stripping to length and connecting
tothe bracket assembly, ensuring
correct polarity. The right terminalis
positive (+ve) and the left terminal is
negative (-ve).
4. Oer the loudspeaker upto the
bracket andlockinto place
withadownward motion.Thisaction
automaticallycloses the
electricalconnections.
5. Angle the loudspeaker as required and
lock the bracket using the 5 mm hex
keyprovided.
Installing the Loudspeaker with
other Wall Brackets
When installing Impact loudspeakers with
Turbosound CB-10 orWB-10brackets,
orOmniMount™ brackets, youwill need to
terminate the cables directly at the
loudspeaker terminal asshown.
73 mm [2.9"]
97 mm
[3.8"]
WB-5 BRACKET TEMPLATE
+ve
- ve
LOUDSPEAKER MOUNTING
INSTRUCTIONS– FORQUALIFIED
PERSONNELONLY
This loudspeaker system may be
permanently installed by qualied
personnel, using approved methods and
materials. Improper installation can pose
serious risk of injury or death. Pleaseread
these instructions in their entirety before
attemptinginstallation.
Permanent installation may only be
attempted by persons licensed and
qualied by appropriate authorities
governing the installation location.
Installers are to employ only original
parts, brackets, fasteners and suspension
accessories or properly ratedand
certied components from third parties.
Replaceany missing parts by contacting
the authorized Reseller or Distributor in
your region. Clarify all local requirements
and obtain necessary approvals and
permits before commencingwork.
When selecting a location for the
loudspeaker to be installed ensure that
all mechanical, acoustic and safety
considerations are observed. Ensure that
the structure is capable of supporting
the load and that all hardware is rated
accordingly with ample safety factor.
Do not suspend loudspeaker over areas
of public circulation or where failure of
the suspension system can cause bodily
or property damage. Inspectsuspension
hardware regularly to ensureintegrity.
Loudspeakers radiate a magnetic
eld, evenwhen they are not in use.
Thismagnetic eld may cause interference
with other devices such as computers,
magnetic media and certain types of video
monitors. Maintaina spacing of 2 meters
between the loudspeaker and any such
devices to preventinterference.
Music Tribe, its aliates and
representatives shall not be liable for any
property damage or personal injury arising
from the improper installation, use or
maintenance of this product.