Product Information Document
10 of 13
Product Information Document
Pair of 2 Way 3.5" Full Range
Loudspeakers with Line Transformers
for Installation Applications
Install
IMPAC T
TCI32-T
Architecture & Engineering Specications
The system shall be of the passive two-way type consisting of one 3.5" (89 mm) low frequency driver and one 1" (25 mm) ferro-uid cooled
neodymium high frequency tweeter with integral line transformer and shall be supplied with an adjustable wall bracket providing integral
electrical connections. Performance specications of a typical production unit shall meet or exceed the following: Frequency response,
measuredwith swept sine wave input, shall be at within ±3 dB from 90 Hz to 20 kHz, and within -10 dB from 70 Hz to 20 kHz. Nominal dispersion,
at -6dBpoints, shall average 120° H x 100° V. Nominal impedance shall be 16 ohms. Power handling shall be 30 watts continuous, 120 Wattspeak.
Sensitivity, measured with 1 Watt input at 1 metre distance on axis, mean averaged over stated bandwidth shall be 88 dB. Maximum SPL (peak)
measured with music program input at stated amplier power shall be 109 dB. Dimensions: 240 mm high x 145 mm wide x 148 mm deep
(9.5" x 5.7" x 5.8"). Net weight: 2.8 kg (6.2 lbs). The loudspeaker system shall be the TURBOSOUND IMPACT TCI32-T. No other loudspeaker shall be
acceptable unless submitted data from an independent test laboratory veries that the above combined performance/size specications are
equalled or exceeded.