User Manual

4 of 8
Product Information Document
Portable Speakers
600 Watt 2 Way 10"
Full Range Powered Loudspeaker with
KLARK TEKNIK DSP Technology for
Portable PA and Installation Applications
MILAN
M10
Technical Speci cations
Dimensions (H x W x D)
522 x 329 x 294 mm (20.6 x 13 x 11.6")
Net Weight
13.3 kg (29.3 lbs)
Components
1 x 10" (254 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response
55 Hz – 18 kHz ±3 dB, 50 Hz – 20 kHz -10 dB
Nominal Dispersion
90° H x 60° V @ -6 dB points
Maximum SPL
126 dB (peak)
Construction
Injection-moulded polypropylene enclosure.
Recessed carrying handle. Integral dual-angle pole mount socket
Grille
Powder coated galvanised perforated steel mesh grille with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot;
Mix out: male XLR wired pin 2 hot; IEC mains connector with integrated fuseholder
Controls
Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/o
Indicators
Power LED (blue), SIG LED (green), LIMIT LED (red), CLIP LED (red)
Ampli er
Type: Class-D
Max Output Power: LF: 500 W; HF: 100 W
Input Sensitivity: Mic: -32 dBu; Line: -2 dBu
Input Impedance: Mic: 560 Ω unbalanced, 1 kΩ balanced
Line: 20 kΩ unbalanced, 40 kΩ balanced
Equalisation: Bass: ±6 dB @ 80 Hz; Treble: ±6 dB @ 12 kHz
Ampli er Protection: Full short circuit, open circuit, thermal
Mains Voltage
USA / CAN: 100–120V~ (T 6.3 A H 250 V)
UK / AUS / EUR: 220–240V~ (T 3.15 A H 250 V)
CH: 220–240V~ (T 3.15 A H 250 V)
JP: 100–120V~ (T 6.3 A H 250 V)
Power Consumption
80 W @1/8 max power
Rigging Options
(6) M10 threaded internal rigging points
Spares And Accessories
LS-1032 10" (254 mm) replacement LF loudspeaker
RC-1032 Recone kit
CD-125 1" (25 mm) HF compression driver
RD-125 HF diaphragm
AMP-M10 Replacement ampli er assembly
PB-55 Wall bracket, pole mount  xing
EB-10 M10 shoulder eyebolt