User's Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
23 MANCHESTER SERIES Rigging Manual
2.14 Vertical Orientation
CORRECT INSTALLATION
INCORRECT INSTALLATION
Vertical Orientation Only!
The mechanical design of the MV212 cabinet, MS215 subwoofer, and the MAN-FG
y grid uses links and quick release pins to assemble the various components.
The mechanical strength comes from the cabinet's metal side pieces and the
pins, and not through the wooden cabinets. The cabinets are supported vertically
below each other, and vertically below the y grid.
WARNING
THE ASSEMBLY MUST BE ORIENTED SO THAT THE SIDES OF THE CABINETS AND
SUBWOOFER ARE ALWAYS KEPT IN THE VERTICAL PLANE. FAILURE TO DO THIS
MAY CAUSE STRAIN AND FAILURE OF THE MECHANICAL STRUCTURE, LEADING TO
POSSIBLE PERMANENT INJURY OR DEATH.
WARNING
THIS ILLUSTRATION SHOWS AN INCORRECT INSTALLATION, WHERE THE SIDES OF
THE CABINETS ARE NOT IN THE VERTICAL PLANE. THIS MAY CAUSE STRAIN AND
FAILURE OF THE MECHANICAL STRUCTURE, LEADING TO POSSIBLE PERMANENT
INJURY OR DEATH.
WARNING
THE MV212 CABINETS, MS215 SUBWOOFERS, AND MAN-FG FLY GRID SHALL NOT
BE CLIMBED UPON. THIS MAY CAUSE STRAIN AND FAILURE OF THE MECHANICAL
STRUCTURE, LEADING TO POSSIBLE PERMANENT INJURY OR DEATH.