User Guide

28 iQ Series Quick Start Guide 29
Pole Mounting
Fullrange iQ loudspeaker models (iQ8, iQ10, iQ12 and iQ15) may also be pole mounted, eitherindependently or in conjunction with iQ subwoofer models (iQ15B, iQ18B).
The iQ pole mount sockets allow fullrange models to be mounted straight or angled 7.5° downwards for optimum coverage.
iQ10, iQ12 and iQ15 models may also be placed on one side and deployed as wedge monitors. Thesemodels have been designed with sides angled at 48° to help with
upward sound dispersion.
Transport
The subwoofers are supplied with castors for ease of transportation when used as a portable sound system. To assemble the castors to the back of the cabinets, remove the 16
bolts from the rear of the speaker, align the castors with the mount holes and replace the bolts.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualied personnel with the required experience and
certication to perform the necessary tasks. Walls, oors or ceilings must be capable of safely and securely supporting the actual load. Themounting accessory used must be
safely and securely xed both to the loudspeaker and to the wall, oor or ceiling.
When mounting rigging components on walls, oors or ceilings, ensure that all xings and fasteners used are of an appropriate size and load rating. Wall and ceiling
claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular xing arrangement can be
safely employed for a particular load. Cavity plugs or other specialist xings, if required, must be of an appropriate type, and must be tted and used in accordance with the
maker’sinstructions.
The operation of your speaker cabinet as part of a own system, if installed incorrectly and improperly, canpotentially expose persons to serious health risks and
even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualied and certied (by local state or national
authorities) personnel prior to any installation or ying.
Make sure that speaker cabinets are set up and own by qualied and certied personnel only, using dedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. Music Group, including the Music Group companies listed on the enclosed
“Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular
checks must be conducted by qualied personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is own, the
area underneath the speaker is free of human trac. Do not y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic eld, even if not in operation. Therefore, please keep all materials that can be aected by such elds (discs, computers, monitors, etc) at a
safe distance. A safe distance is usually between 1 and 2 metres.
Montage et xation
Les haut-parleurs ampliés de la série iQ sont conçus avec plusieurs points de xation internes pour s'adapter à de nombreuses méthodes de montage possibles dans
des installations permanentes. Toutes les armoires peuvent être simplement suspendues à l'aide de boulons à œil M10 en option couplés aux points d'accrochage
internes fournis en haut, en bas, sur les côtés et à l'arrière. La méthode la plus simple consiste à utiliser les deux points d'accrochage sur le dessus et un seul point
d'accrochage à tirette au centre du panneau arrière. Retirez les capuchons en plastique appropriés et insérez les boulons à œil, qui doivent avoir une longueur de
letage d'au moins 30 mm. Utilisez le point d'accrochage arrière pour incliner l'armoire pour une couverture optimale de la pièce.
Supports muraux et de plafond
Turbosons Les supports muraux et de plafond iQ8-WB, iQ10-WB, iQ12-WB et iQ15-WB sont disponibles en option pour la série iQ.
Le graphique ci-dessous montre l'assemblage des supports de montage en option (iQ8-WB, iQ10-WB, iQ12-WB et iQ15-WB).
YOKE VERTICAL MOUNTINGYOKE HORIZONTAL MOUNTING
1
3
2
1
3
2
OBJET LA DESCRIPTION QUANTITÉ
1 Entretoise de joug 2
2
Vis M5 x 25 mm avec frein
leten nylon
4
Étape 1 : Sécurisez les entretoises de joug
OBJET LA DESCRIPTION QUANTITÉ
1 Support de fourche en acier 1 1
2 Support de fourche en acier 2 1
3 Support de fourche en acier 3 1
4 Rondelle plate M6 6
5 Vis M6 x 16 mm 6
6 Écrou de blocage en nylon M6 6
OBJET LA DESCRIPTION QUANTITÉ
1 Support de fourche en acier 1 1
2 Support de fourche en acier 2 1
3 Vis M5 x 15 mm 2(IQ8) 4(iQ10)
4 Rondelle plate M5 2(IQ8) 4(iQ10)
5 Écrou de blocage en nylon M5 2(IQ8) 4(iQ10)
Étape 2 : Assembler le support de joug en acier : IQ12 et iQ15
Étape 2 : Assembler le support de joug en acier : iQ8 et iQ10
OBJET LA DESCRIPTION QUANTITÉ
1
Assemblage de support
dejougen acier
1
2 Vis M8 x 25 mm 2
3 Rondelle plate M8 2
4 Rondelle à ressort M8 2
Étape 3 : placez le haut-parleur dans le support de joug
REMARQUE: Pour iQ8 et iQ10, le support ni ne nécessite que 2 pièces, tandis que le support iQ12 et iQ15 nécessite 3 pièces.