User Manual
10 11
iNSPIRE iP82/iP15B/iP12B Quick Start Guide
iP DSP Menu Structure
Menu Sub-Menu Fullrange Function
Main Screen
Displays level indicators and model name.
Displays the following Bluetooth statusinformation:
• Bluetooth symbol indicates connection to audio and remote
control device (iPhone, etc.).
• “M” or “S” below the Bluetooth symbol indicate that the
speaker is linked to another iP speaker as MASTER
(left
channel, “M”) or SLAVE (right channel, “S”).
Rotate the encoder knob to adjust the output volume.
Press the encoder knob to enter the PROCESS menu.
Volume Rotate the encoder to change the outputvolume.
MODE
Selects from 4 preset equalisations, depending on function and
music type.
INPUT
Sets input mixer gain for analogue input A and B, Bluetooth, as
well as Mono on/o setting.
EQ
(Equalisation)
Allows adjustment of three band equaliser control, bass, midrange
and treble.
POSIT.
(Position)
Selects DSP compensation depending on the speaker position:
corner, wall or oor.
BT
(Bluetooth)
Lets you pair the speaker with mobile Bluetooth devices and link to
another iPspeaker as master / slave.
SUBWOOFER Allows control of subwoofer relative level.
SETUP Sets LCD back panel contrast, device lock and factory reset.
INFO Displays model and rmware information.
*iPhone and iPad are trademarks of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Android is a trademark of Google Inc.
Windows is either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other countries.
iP Series Analogue Connection
Despite their sophistication, iP speakers o er straightforward analogue connectivity, and you can easily arrange the iP system to allow simple control of levels from
other devices, such as mixers. You can also daisy-chain multiple iP speakers using only the analogue connections, and then directly control the overall level from your
mixer’s master fader.
For typical operation using the iP speakers as a 2.1 subwoofer / satellite system, make all connections using the following procedure:
1. Set the DSP volume and input gain settings on the iP speaker to a at “0 dB” setting.
2. Connect the mixer’s left stereo output to the iP subwoofer’s analogue INPUT A
3. Connect the mixer’s right stereo output to the iP subwoofer’s analogue INPUT B.
4. Connect the subwoofer’s OUTPUT A to the left iP82’s INPUT connection.
5. Connect the subwoofer’s OUTPUT B output to the right iP82’s INPUT connection.
6. Using the DSP control panel on the speaker, set your desired OUTPUT levels and EQ curves.
If you wish to deploy your speakers in a left-right stereo configuration with dual subwoofers, use this procedure:
1. Set the DSP volume and input gain settings on all of the iP speakers to a at “0 dB” setting.
2. Select “Mono: On” from the DSP submenu of both subwoofers. The “Mono” setting will sum each subwoofer’s analogue inputs before sending the combined signal out
to that subwoofer’s respective satellite speaker(s).
3. Connect the mixer’s left stereo output to the left iP subwoofer’s analogue INPUT A.
4. Connect the left subwoofer’s OUTPUT A to the iP82 satellite speaker’s INPUT connection. (If you have an additional satellite speaker, you can use the subwoofer’s
OUTPUT B to send an identical signal to the extra speaker.)
5. Connect the mixer’s right stereo output to
the right iP subwoofer’s analogue INPUT A.
6. Connect the right subwoofer’s OUTPUT A and/or OUTPUT B to the right channel satellite speakers.
7. Using the DSP control panel on each speaker, set your desired OUTPUT levels and EQ curves.
iP Series Bluetooth Instructions
Bluetooth Connection
To play audio from a Bluetooth-enabled device, you will need at least one iP speaker and an iPad*/iPhone*/Android*/Windows* device with basic
Bluetooth connectivity. With a basic Bluetooth connection, allrelated iP DSP functions must still be controlled directly from the iP rear panel via the rotary encoder.
For Apple iOS devices, you can also download a dedicated TURBOSOUND iP Bluetooth app from the AppleApp Store. This iP Bluetooth app allows you to control a single
or stereo pair of iP speakers, including all DSP functions, remotely from your iOS device (see “Bluetooth Control” below for moreinformation).
Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.)
Single subwoofer operation
1. Enable Bluetooth on your remote device.
2. Switch on your iP speaker and minimize the volume.
3. Select “Pair device” from the iP speaker’s Bluetooth menu.
4. Check that your remote device is searching for a connection.
5. Once your device detects the iP speaker, select the iP speaker from your remote device’s menu (e.g.,“TURBOSOUND iP15B”).
6. Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu, which should display the name of the remote device (e.g.,
“HUAWEI P7-L07”).
7. Bluetooth music can now be streamed to your iP speaker.
8. The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen.
9. The stereo signal will be down mixed to mono for the subwoofer, but will remain in stereo for the left and right speaker outputs.
Dual subwoofer operation
1. Complete the steps above to connect the rst speaker to Bluetooth audio.
2. The rst connected speaker automatically becomes the MASTER speaker.
3. Switch on the second speaker, which becomes the SLAVE speaker.
4. Select “Link speaker” from the SLAVE speaker's Bluetooth menu.
5. The SLAVE speaker will display “Slave linking...”
6. Select “Link speaker” from the MASTER speaker’s Bluetooth menu.
7. The MASTER speaker will display “Linking Master …”