How to Guide

22 TurboLock TL - 99
Section 10
Resetting the Lock
• Resets cannot be reversed.
• Performing a reset will delete all passwords including the Admin Password.
• Once all passwords are erased, only the Admin Password can open the lock via the default password.
• After a reset:
○ Admin Password will return to its default ‘123456’.
○ Choose a new Admin Password immediately. See Section 6.
○ All digital keys and codes issued via the app will be erased. In order to restore app functionality, it must be paired with the
lock again.
Option 1
Step 1. Use the keypad to enter the current Admin Password, then ‘#’. The lock will engage.
Step 2. Press ‘3’ then ‘#’. The lock will reset.
Option 2
Step 1. Remove the cover from the battery compartment at the back of the lock.
Step 2. Press and hold the reset button for approx. 10-12 seconds until two beeps are heard.
• If the lock is removed, it will be reset as a reset will occur if the internal cables are disconnected and reconnected.
• A reset can also be performed via the app if needed.