How to Guide

20 TurboLock TL - 99
9.3 Generating, Converting and Deleting Keypad Passwords
For users without Turbolock app access, the Turbolock admin can generate and send a 10 digit code that users can manually enter
into the Turbolock to gain access. This 10 digit code can be revoked at any time by the Turbolock Admin. If needed, the length of the
passwords can be entered into the lock and changed to a shorter one so that it is easier to remember.
Keypad passwords should only be used for periods of temporary use. For permanent keys, it is highly recommended to add
user passwords. For instructions, refer to Section 7.
OVERWRITING POSSIBILITY. You may generate and convert passwords up to 5 times. If you attempt to generate
another password and then convert it, this new password will overwrite the rst converted password.
How to Generate
Step 1. After opening the app, tap the lock to open the main interface.
Step 2. Tap “Reset Keys” to receive key permissions from the TurboLock server. Tapping “Reset Keys” should only be done
once. Subsequent taps will erase any digital keys.
Step 3. Tap “Admin Password” to open the corresponding admin-only menu.
Step 4. Tap “Send Keyboard Password”, select duration and send.
Step 5. A temporary keypad password (8-10 digits) should then display on-screen. Give this code to the desired party.
How to Convert
If you are the lock’s admin, a Keypad Password can be generated in-app. If you are a user for the lock, the admin must rst
generate the password and give it to you.
Step 1. Press any key so that the keypad lights up, then enter the Keypad Password (8-10 digit password received in-app or
via the lock’s admin), and then press ‘#’.
Step 2. Before the light turns o󰀨, enter a shorter password (5 digits long), then enter the ‘#’.