How to Guide

16 TurboLock TL - 99
Section 5
Using the Lock
Press any key so that the keypad lights up, enter the Admin Password, and then enter ‘#’. The lock will engage and unlock the door.
Note, the lock will engage again after a moment and lock the door again.
The Admin Password must be changed from the default manufacturing password. See Section 6.
The lock can also be unlocked via the app. Refer to Section 9.
Section 6
Keypad Passwords
6.1 Changing the Admin Password
• The Admin Password must always be exactly 6 digits long.
• The default Admin Password is ‘123456’.
For security, it is highly recommended that you change the Admin Password from the manufacturer default.
Step 1. Use the keypad to enter the default (‘123456’) or the current Admin Password then enter ‘#’.
Step 2. Enter ‘1’ then enter ‘#’.
Step 3. Enter the new Admin Password then press ‘#’.
Step 4. Re-enter the new Admin Password then press ‘#’.
Step 5. Wait for the backlight to go out so that the new password successfully saves.
Step 6. If desired, test the new password to conrm the modication was successful.
• The password must be entered while the blue backlight is on. If it goes out, begin again at Step 1.
• If the Admin Password is lost or forgotten, the lock may be reset. Refer to Section 9.