Manualshelf

How to Guide

ManualsBrandsTurboLock ManualsDoor HardwareTURBOLOCK TL-111 Digital Door Lock with Keypad, Door Knob-Style for Keyless Entry Digital Security with Passcode Disguise, Backup Keys and Emergency Power Port
11121314151617181920
TurboLock TL111 PRO 11
Step 4. Feed the power cable through the battery compartment and make sure the side with inside screw is downward. (Fig. 7)
Step 5. Gently pull the power cable out to snap it into the cable connectors, then collect the cable back to battery compartment.
(Fig. 8)
Step 6. Install 4 x AAA standard batteries or rechargeable batteries into battery compartment. Cover the inside knob over
battery compartment and make sure the side with inside screw is downward. Use the hex key to fasten the inside
screw to complete the installation. (Fig. 9)
Hex Key
Power Cable
(Fig. 7)
Power Cable
(Fig. 8)
4 x AAA Batteries
Inside Knob
Hex Key
(Fig. 9)
Do NOT force the cable’s connector end through any part of the lock. Damaging the connector may make the lock
unusable.
Step 7. The lock should now be ready to use. It’s highly recommended to use the default password to test the lock to
make sure it works before closing the door. See Section 6 for information on the default admin password.