User's Manual

Model : IA-300
Installation Guide
Page 26
APPENDIX E – VERIFYING / CHANGING THE ADSL MODE
NOTE: The default installation ADSL mode is ANSI T1.413 Issue 2 or ANSI. If your ISP
is providing a different mode then you need to change the setting.
1. On the right-hand side of the task bar, right click on the Diagnostic Tools icon. Then
select Configuration.
2. The Configuration window appears. Select the ADSL Mode option and then select
the ADSL mode type provided by your ISP. The service mode type will be one of the
following:
q
ITU G.992.1 Annex A (G.dmt) ....................referred to as G.dmt
q
ITU G.992.2 Annex A/B (G.lite)..................referred to as G.lite
q
ANSI T1.413 Issue 2.......................................referred to as ANSI
3. After you select and check your ISP’s service mode, click Set.
The ATM mode has been set and you are ready to enjoy your IA-300 the Internet.