User's Manual

Model : IA-300
Installation Guide
Page 11
Bridged Ethernet service for Windows 95A
1. After installing the IA-300 card, power on the PC system. The Hardware Wizard will
detect the IA-300 as a PCI Network Controller. Select the Driver from disk
provided by hardware manufacturer option.
2. Insert the IA-300 Driver CD into the CD-ROM drive.
3. The Install From Disk window appears. Enter the <CD drive
letter>:\Drivers\Win95_98\BEoA (e.g. D:\Drivers\Win95_98\BEoA), then click OK.
4. When the Service Option window appears, click Next for the default installation
(VPI=8, VCI=35, Framing=LLC). For Advanced settings, please consult your ADSL
service provider for detailed information.
NOTE: If you clicked Advanced, the Service Options window shows the Connection
Address. Enter the service Connection Address, click OK. The previous Service
Option window will appear, click Next.
NOTE: If prompted, insert your Windows 95 CD into the drive and click OK.
NOTE: If during the file copying process a file is reported as “not found” enter the path
<CD drive letter>:\Win95 (e.g. D:\Win95)
5. At the conclusion of the IA-300 driver installation, the Diagnostic Tool icon will appear
disabled on the task bar. You must now Restart the PC system to complete the
installation; the Diagnostic Tool will then become active.
6. Proceed to Bridged Ethernet ADSL Service Configuration, page 14.