Brochure


  
0386-1370 NPK-TT Nitrogen Purge Kit
0386-0814 245-03P Nitrogen Regulator
0386-1371 TT-1 Turbo Tornado
™
0386-1372 CP-1 1/2'' Cone Plug
0386-1373 CP-2 3/4'' Cone Plug
0386-1374 NT-1 Needle Tip
0386-1375 CO2-NPK CO2 Adapter
0386-1376 CH-36 36'' X 1/4'' Standard Charge Hose
0386-1377 CH-72 72'' X 1/4'' Standard Charge Hose
0386-1378 BG-NPK Blow Gun
Why Purge With Nitrogen?
Nitrogen purging: When brazing copper, it is imperative to purge with nitrogen in order to minimize or eliminate oxidation that results
from heating the copper pipe. Without purging, oxidation will occur and the oxidized flakes that result can and will break off and flow
through the system, damaging bearings and fouling system filters. All that is needed is a low pressure, low volume flow of nitrogen.
The use of dry nitrogen gas also minimizes the need to evacuate moisture from the system.
COMPLETE NITROGEN PURGE KIT


The TurboTorch
®
Nitrogen Purge Kit is designed with the professional in mind. This kit gives
you the tools to pressure check HVAC and Refrigeration lines, flush drainage lines, blow clean
components, and purge lines prior to brazing to protect the joints from oxidation.

U.S. Customer Care: 800-238-0282 / FAX [phone]