TurboTorch ® HVAC/R and Plumbing Equipment Catalog Extreme Air Acetylene Equipment Swirl Combustion Air Acetylene Equipment Extreme MAPP & Propane Equipment Proline MAPP & Propane Equipment Oxy Acetylene Outfits and Components Plasma Cutters Accessories Cylinders
The first choice for Plumbing and HVAC/R Pros TurboTorch – The most demanded torch in the market For decades, TurboTorch has set the highest standard for manufacturers of air fuel equipment. We’ve maintained this level of leadership by continually improving our torches with advanced flame technologies. Tests prove that our most recent innovation, the series, is the hottest torch in the market today – up to 40% hotter than competitive torches.
Table of Contents Air / Acetylene Self Lighting Extreme Kits Extreme Tips 4 5 Air / Acetylene Standard Extreme Kits Extreme Tips 6 6 Air / Acetylene Sof-Flame Sof-Flame Torch Kits Sof-Flame Tips 7 7 Air /Acetylene Components 7 Air / MAPP & Propane Extreme Self Lighting Torches 8 Extreme STK Torches 9 Extreme Tips 9 Proline Self Lighting Kits 10 Proline Self Lighting Tips 11 Proline Standard Kits 12 Proline Standard Tips 12 Snake Kits 13 Additional Torches 13 Oxy Acetylene Outf
Air Acetylene Replaceable Tip Quick Disconnect Handle and Tip Self Igniting Trigger Extreme Self Lighting Torch Kits Extreme Swirl Technology delivers high heat, super fast, reducing brazing time and fuel consumption. All air acetylene kits include gauge guards and cylinder wrench. Our best line of self-lighting torch kits are available in either valve rear or valve forward configurations.
Air Acetylene Extreme Self Lighting Replacement Tips Increase the range of your torch kit with additional self lighting tips. All TurboTorch tips feature an orifice screw that can be easily removed for simple cleaning or replacement, extending the life of the tip. With Color Coded "O" Rings Red for Acetylene (0386-0874) PL-3A PL-5A PL-8A PL-12A 5A-TE 8A-TE 12A-TE (0386-1059) (0386-1064) PL-3A Tip No. 3A-TE Tip Size IN. MM 1/4 3/16 5/16 3/8 5.0 6.4 7.9 9.5 PL-5A Gas Flow .31 .42 .59 .
Air Acetylene Extreme™ Standard Torch Kits This line of kits has been the industry standard for decades. Reliable and well engineered, the standard line of kits combines our Extreme Swirl Technology with a traditional manual lighting torch. All tips feature quick disconnect couplings and color coded O-rings for gas identification.
Air Acetylene Sof-Flame™ Torch Kits- For situations where Swirl Technology is too much, Sof-Flame™ torch kits offer proven durability and performance for plumbing applications in harsh environments. Tips have a threaded connection and feature a removable orifice screw. Use the Snappy Adapter (0386-0500) to connect “A” style tips.
Propane & Mapp ® Extreme™ Propane and MAPP Torches TurboTorch has developed a new series of hand torches that also feature Extreme Swirl Technology. The new Extreme series generates more heat than other hand torches for faster brazing times and less gas consumption. All Extreme series hand torches and tips feature TurboTorch swirl combustion. Higher heat levels, in a short amount of time, enable the pros to quickly complete the job.
Propane & Mapp ® Attractive Clamshell Packaging Extreme™ STK Torches and Tips A longtime industry benchmark, the TurboTorch line of STK torches and tips now features the new Extreme Swirl technology. All torches have 360 degree swivel tips and easy to clean orifice screws. Torch kits include the STK-R Pressure Regulator with CGA-600 connection and instruction manuals.
Propane & Mapp ® Self Igniting Trigger Replaceable Tip Quick Disconnect Handle and Tip Color Coded O-rings for Gas Identification Proline Self Lighting Propane & MAPP Kits: Featuring TurboTorch’s Swirl Combustion technology, the Proline series kits engineered for performance and durability. All kits are equipped with RL-P Regulators (CGA-510), allowing for the use of high heat/energy gasses such as MAPP or Propane.
Propane & Mapp ® Proline Self Lighting Tips With Color Coded "O" Rings Blue for LP PL-3T (0386-0821) PL-4T (0386-0822) H-4 (0386-0300) R-LP (0386-0705) Fits all Proline and TurboTorch tips "B" size 9/16" - 18 hose connections PL-3T PL-4T PL-5T ⁄8 ⁄16 5 ⁄8 3 7 9.5 11.1 15.9 PL-5T (0386-0823) Brass regulator for use with MAPP®, Propane and other LPG fuel gas. Adjustable to 60 psi. Fits standard POL valve & 9/16” 18 LH hose nut. Not for use with Acetylene.
Propane & Mapp ® Proline Standard Propane & MAPP Kits: Designed with the same Swirl Combustion Technology that is featured in the Proline Self Lighting Series, the manual series offers an economical alternative for use with Propane and Mapp gasses. A variety of tips sizes helps complete the job quickly and economically.
Propane & Mapp ® 13 Snake Kits & Additional Torches The swirl combustion tip gives you the best burn and cuts brazing time by 30%. Flame tube swivels 360˚ for work at any angle. Push trigger ignition. Rugged brass regulator. Offered with either #3 or #4 size tip with replaceable tip. PS-3T KIT TS-1B KIT COMPONENTS COMPONENTS (0386-0840) (0386-0230) • Self-Lighting Propane & MAPP® Tip • TSR Tank Rack with Retainer • Ergonomically designed handle • STK-R Regulator CGA-600 • 12 ft.
Oxy-Acetylene Welding, Cutting and Brazing Outfits TurboTorch outfits are manufactured by Victor, the most recognized name in Gas Apparatus. The outfits are available in several configurations designed for a variety of oxy-fuel welding and cutting applications. The new tote design features an ergonomic carrying handle, built-in storage case and a functional balanced design. Each outfit includes the components needed to tackle jobs from light duty welding, to specialized brazing, to cutting steel.
Oxy-Acetylene 15 TurboTorch – TTV-J Series Light Duty – Oxy Fuel & Air Fuel This series of outfits is designed for Light Duty Cutting, Brazing and Heating jobs. All outfits include Oxy Regulator 221-05FP, Fuel Regulator 201-05FP, 12.5’ Dual “A” 3/16 hose 252-03P, glasses and a striker. Refer to the following chart for additional components. TTV-J-STP TTV-J-APT (0386-1342) (0386-1339) Part No.
Oxy-Acetylene Components CutSkill – CST Series Light Duty - Oxy Fuel This series of outfits is designed for Light Duty Cutting, Brazing and Heating jobs. All outfits include Oxygen Regulator SKR-540R, Fuel Regulator SKR-200R, 12.5’ Dual “A” 3/16 hose 252-03P, goggles, check valves and a striker. Refer to the following chart for additional components. CST-P CST-CM CST-PT CST-150C (0386-1320) (0386-1324) (0386-1321) Part No.
Oxy-Acetylene Components 17 Torch Handles Design & Construction Victor ® torch handles cover the full range of welding, cutting and heating needs Performance matched cutting attachments are available for each torch handle series. Handles include built-in flashback arrestors and reverse flow check valves.
Oxy-Acetylene Components Torch Handles 315 FC (0387-0008) Patent # 5407348 100 FC (0382-0032) J-28 Patent # 5407348 (0382-0127) Patent # 5407348 Listed A New Dimension In Operator Safety! Victor Torch Handles are available with the following safety features: 101-01 FP • Built-In Flashback Arrestors - on most models, see chart below (0386-0310) • Built-in Reverse Flow Check Valves 103-01 FP J-40 (0386-0311) Part No.
Oxy-Acetylene Components 19 Cutting Attachments Design & Construction Features on Victor Branded Product Smooth Cutting Oxygen Valve for precise ease-on control (push type) Stainless Steel Tubes for added torch strength and heat resistance Stainless Steel Lever for extra durability Brass Coupling Nut & Double “O” Ring Seal gives quick gas-tight seal without a tightening wrench CA1350 Part No.
Oxy-Acetylene Components Brazing and Multi Flame Nozzles Exclusive “OPTIMIZED” nozzles in largest choice of types and sizes, plus uniformity of tip orifice and size for all series TurboTorch offers a complete range of nozzles, tips and elbows with a size for every application including: Welding, brazing, heating. Nozzles designed for “optimum” performance - Each complete nozzle has its own built-in spiral mixer, individually designed for each tip size and flame characteristic.
Oxy-Acetylene Components 21 Replaceable Tip Ends for use with Acetylene Gas UN TE UM TEMF FE Part No.
Oxy-Acetylene Components Cutting Tips Part No.
Oxy-Acetylene Components 23 Acetylene & Oxygen Regulators 201-05FP 221-05FP (0386-0784) (0386-0786) MODEL NO. PART NO. SKR-200R SKR-540R (0426-2006) HIGH PRESSURE GAUGE P.S.I.G. KPA (0426-2005) LOW PRESSURE GAUGE P.S.I.G. KPA DELIVERY RANGE P.S.I.G.
Oxy-Fuel Components CGA Compressed Gas Cylinder Valve Outlets & Connections Acetylene Argon Butane Helium Nitrogen Oxygen Propane CGA 200 Acetylene (MC) 520, 510 580 510 580 580 540 510 NOTE: These CGA connections are designed by Compressed Gas Association, Standard V-1, 6th Edition, 1987, For latest standards and connections, contact Compressed Gas Association. CGA 520 Acetylene (B) Part No. Description Part No. Description 0964-0005 SWIVEL 1/4-18 NPT (M) (NUT INCLUDED .
Accessories Oxy/Acetylene Twin Hose 25 Torch Shield 252-03P (0386-1094) • 12.5ft., “A” Fittings PL-812 (0386-0561) • (8” x 12”) Acetylene Hose AH-12 (0386-1090) • 12ft., “A” Fittings AH-24 (0386-1091) • 24ft., “A” Fittings “Total LP” Hose H-12 (1412-0080) • 12ft., “B” Fittings H-24 (0386-1087) • 24ft., “B” Fittings Part No. Model Number Description 0386-1094 0386-1090 0386-1091 1412-0080 0386-1087 252-03P AH-12 AH-24 H-12 H-24 121⁄2 ft. Twin Hose "A” Fitting 12ft. Hose "A” Fitting 24ft.
TurboTotes ® (0386-1241) (1421-0084) Turbo Tote only CutSkill Tote only TSR Tank Rack 143-01 (1421-0039) (0386-0528) • A durable wire frame and spring combination holds 1 lb. tanks securely at a 45° angle from the floor. TT-150 (1421-0016) Durable composite construction fits “B” tank. Features include a hose rack for storage while not in use and helps protect the regulator from accidental damage. A large handle keeps your tank portable.
Regulators/Kits 27 TT-LP TurboTest Refrigerant Leak Detector (0386-0443) The TurboTest “Total LP” Leak Detector fits standard TurboTorch MAPP® (MT-1) or Propane (PT-1) tanks. The TurboTest “Total LP” is compact, easy to use and capable of detecting leaks of 8 oz. per year. It’s made of brass construction with a stainless steel shield. Sniffer tube swivels 360° for easy handling. Heavy copper reactor plate (TT-R-LP) gives extra long life, yet is easily replaceable.
Turbo Cylinders & Tanks PT-1 (0916-0004) MT-1 (0916-0009) • Propane replacement tank for use with all TurboTorch hand torches. Also for use with TurboTorch #TT-LP Leak Detector. • Contains 14.1 oz. propane. • CGA 600 Connection • Non-Refillable • MAPP® Gas replacement tank for use with TurboTorch dual fuel hand torches. Also use with TurboTorch #TT-LP Leak Detector. • Contains 16 oz. of MAPP® Gas. • CGA 600 Connection AC-B (0916-0005) AC-MC (0916-0002) •Type “B” Acetylene Cylinder, 40 cu. ft.
Alloys Brazing Alloys for Maintenance on Steel Products BF-1(0386-0422) Bronzeflow (for steel materials other than stainless steel - available in 1 lb. package) Brazing range 1595-1620°F (868-882°C) for low fuming bronze. Ideal for maintenance repairs on plumbing and heating. Tensile strength - 63,000 psi. Meets AWS A5.8, ASTM B-259, Federal QQR571B, MIL-R-19631B specifications. NS-1(0386-0431) NicSil-Flow (for stainless steel and chrome-plated products) Nickel content brazing rod.
Plasma Cutters Durable and portable, our plasma cutters are designed for cutting applications most often found in the HVAC industry. Both models are engineered by Thermal Dynamics, a leader in Plasma Cutting systems and consumables. A B C D FP 20A (1445-0108) Ideal for HVAC and sheet metal fabrication, this machine delvers clean cuts on most metals including stainless steel and aluminum. This inverter unit automatically links up to primary voltage from 115 to 230 volts. Weighing just 44 lbs.
Warranty Victor/TurboTorch Warranty “LIMITED WARRANTY”: Victor warrants that its products will be free of defects in workmanship or material. The use with any Victor product or replacement parts or accessories, which are not manufactured or distributed by Victor and which may affect product safety or performance, shall render this warranty and all other warranties, whether express or implied, null and void.
WORLD HEADQUARTERS: Suite 300, 16052 Swingley Ridge Road • St. Louis, MO 63017 • 636-728-3000 CUSTOMER CARE: 800-238-0282 • FAX 800-535-0557 INTERNATIONAL CUSTOMER CARE: 905-827-9777 • FAX 905-827-9797 U.S. AUTOMATION CUSTOMER CARE: 866-279-2628 • FAX 316-941-4491 International Customer Care Oakville, Ontario, Canada Ph: (1) 905-827-9777 Fax: (1) 905-827-9797 Thermadyne Japan Osaka, Japan Ph: (81) 6-4809-8411 Fax: (81) 6-4809-8412 Form No.
