Brochure

Canada Customer Care: 1-905-827-4515 / fax 1-800-588-1714
International Customer Care: 1-940-381-1212 /
fax 1-940-483-8178
33
MULTI-PROCESS WELDING SYSTEMS
WELDING & PLASMA
ESAB FABRICATOR 252i
Multi-Process 3-in-1 MIG/Stick/TIG
Welding System
Part No. W1004401
System Includes:
§ Fabricator 252i Power Supply
§ Tweco Fusion
®
250 Amp MIG Gun with 15 ft (4.6 m) Cable
§ Victor
®
EDGE
Argon Flowgauge Regulator
with 12.5 ft (3.8 m) Gas Hose
§ Tweco
®
200 Amp Electrode Holder with 13 ft (4 m) Lead
§ Tweco 200 Amp Ground Clamp with 10 ft (3 m) Lead
§ 3 Bonus Contact Tips & 3 Drive Rolls
§ 4 General Purpose Stick Electrodes (E6013)
§ Power Cord, 9 ft (2.75 m) and NEMA 6-50P 230VAC Plug
§ Outlet Guide, .023" (0.6 mm), Operator’s Manual & CD
Multi-Process 3-in-1 MIG/Stick/TIG
Welding System with Single Cylinder Cart
Part No. W1004402
System Includes:
§ All of the components listed above in the Fabricator 252i
Multi-Process Welding System PLUS...
§ Single Cylinder Cart with Parts Storage Box and
Accessory Drawer
Multi-Process 3-in-1 MIG/Stick/TIG
Welding System with Dual Cylinder Cart
Part No. W1004403
System Includes:
§ All of the components listed above in the Fabricator 252i
Multi-Process Welding System PLUS...
§ Dual Cylinder Cart with 2 Parts Storage Boxes and
Accessory Drawers
§ Extra Flowgauge Regulator & Gas Hose, TIG Rod &
Stick Electrode Storage Canisters, Spool Gun, TIG
Torch & Accessories
The Fabricator
®
252i is the most powerful of all the 3-in-1 machines -- with a
maximum output of 300 Amps it can provide the performance you need. It has
the power to run .045” Flux-Cored wire or MIG weld 1/2" steel in the spray transfer
mode, an amazingly crisp short circuit MIG arc for sheet metal and can TIG weld
down to 5 amps when precision counts. Dual gas connections on the back of the unit speed change-over when switching between
processes that require different shielding gases. The Fabricator 252i is complete out of the box, yet is also available in packages with
a single cylinder or dual cylinder cart. Built with quality Tweco and Victor components, digital meters, and excellent output for all three
processes, this system is built for professional grade performance. The Fabricator 252i welding characteristics are optimized to supply
the best welding performance whether in the MIG, TIG or Stick modes, the possibilities for this machine are endless.
SPECIFICATIONS
Maximum Output
300 Amp
MIG (GMAW/FCAW)
Welding Output @104˚F (40˚C)
250A / 26.5V @ 40% Duty Cycle
200A / 24V @ 60% Duty Cycle
150A / 21.5V @ 100% Duty Cycle
STICK (SMAW)
Welding Output @104˚F (40˚C)
230A / 29.2V @ 40% Duty Cycle
200A / 28V @ 60% Duty Cycle
150A / 26V @ 100% Duty Cycle
TIG (GTAW)
Welding Output @104˚F (40˚C)
250A / 20V @ 40% Duty Cycle
200A / 18V @ 60% Duty Cycle
150A / 16V @ 100% Duty Cycle
Current Range
10 – 300 Amp
MIG Welding Voltage Range
14 – 30 Volt
Nominal OCV Volt/DC
72 Volt
Rated kVA
8.2 kVA @ 250 Amps
Wirefeed Speed Range
67 – 700 IPM (1.7 – 17.8 m/min)
Maximum Plate Thickness
1/2" (12.7 mm)
Wire Diameter Range
Mild Steel:
.023" – .045" (0.6 – 1.2 mm)
Stainless Steel:
.023" – .035" (0.6 – 0.9 mm)
Aluminum: (with Spool Gun)
.030" – 3/64" (0.8 – 1.2 mm)
Flux Cored:
.030" – .045" (0.8 – 1.2 mm)
Spool Size Capacity
4", 8" & 12" (100, 200 & 300 mm)
Power Source Weight
65.3 lbs (29.6 kg)
Primary Power
Primary Voltage
208/230 VAC
Supply Voltage Range
187-276 VAC
Number of Phases
Single Phase
Supply Frequency
50/60 Hz
Power Cord
9 ft (2.75 m)
Maximum Input Current
39.5 Amp
HERTZ
60
50
MIG STICK
HF TIG
TIGFLUX-CORED
INPUT POWER
1
PHASE
3
YEARS
WARRANTY
1
YEAR
WARRANTY
VOLTAGE
120/230
VOLTS
STICKHF TIG LIFT TIG
PAW
PLASMA
HERTZ
60
50
MIG STICK HF TIGTIGFLUX-CORED
INPUT POWER
1
PHASE
3
YEARS
WARRANTY
1
YEAR
WARRANTY
VOLTAGE
120/230
VOLTS
STICKHF TIG LIFT TIG
PAW
PLASMA