Brochure

U.S. Customer Care: 1-800-426-1888 / fax [phone]
esab.com
32
WELDING & PLASMA
MULTI-PROCESS WELDING SYSTEMS
ESAB FABRICATOR 141i
Multi-Process 3-in-1 MIG/Stick/TIG
Welding System
Part No. W1003141
System Includes:
§ Fabricator 141i Power Supply
§ Tweco Fusion 140 Amp MIG Gun with 10 ft (3 m) Cable
§ Victor Argon Flowgauge Regulator with 12.5 ft (3.8 m) Hose
§ Electrode Holder with 13 ft (4 m) Lead
§ Ground Clamp with 10 ft (3 m) Lead
§ 3 Bonus Contact Tips & 2 Drive Rolls
§ 4 General Purpose Stick Electrodes (E6013)
§ Power Cord 10 ft (3 m) and NEMA 5-20P 120V AC Plug
§ 120V – 230V Power Adapter, 20A to 15A
§ Shoulder Strap, Operator’s Manual & CD
Multi-Process 3-in-1 MIG/Stick/TIG
Welding System with Utility Cart
Part No. W1003142
System Includes:
§ All of the components listed above in the Fabricator 141i
Multi-Process Welding System PLUS...
§ Basic Utility Cart
ESAB
®
FABRICATOR
®
SERIES -
MULTI-PROCESS WELDING SYSTEMS
The ESAB Fabricator Series, with its 3-in-1 inverter technology, provides outstanding MIG, Stick and Lift TIG performance. You
can tackle steel, stainless and aluminum projects with a single welding system. Even better, compact and lightweight Fabricator
welders go wherever the work takes you. 3-in-1 welders are a great value and cost about the same as competitive MIG-only
units but deliver multi-process welding outputs – that’s like getting a FREE Stick/TIG inverter. ESAB Fabricator welding systems
are the total package with the most trusted brands in the industry: Tweco Fusion
®
MIG guns, Tweco Velocity
™
MIG consumables,
Tweco
®
electrode holders and ground clamps and Victor
®
gas regulators.
SPECIFICATIONS
Maximum Output
140 Amp
MIG (GMAW/FCAW)
Welding Output @104˚F (40˚C)
140A / 19V @ 15% Duty Cycle
90A / 18.5V @ 20% Duty Cycle
STICK (SMAW)
Welding Output @104˚F (40˚C)
90A / 23V @ 15% Duty Cycle
90A / 23.2V @ 35% Duty Cycle
TIG (GTAW)
Welding Output @104˚F (40˚C)
140A / 15.6V @ 15% Duty Cycle
100A / 14V @ 20% Duty Cycle
Current Range
10A – 140 Amp
MIG Welding Voltage Range
14.5 – 19 Volt
Nominal OCV Volt/DC
53 Volt
Rated kVA
5 kVA @ 140 Amps
Wirefeed Speed Range
90 – 390 IPM (2.3 – 9.9 m/min)
Nominal OCV Volt/DC
53 Volt
Maximum Plate Thickness
3/16" (4.8 mm)
Wire Diameter Range
Solid:
.023" – .030" (0.6 – 0.8 mm)
Stainless Steel:
.023" – .030" (0.6 – 0.8 mm)
Aluminum:
.030" (0.8 mm)
Flux Cored:
.030" – .035" (0.8 – 0.9 mm)
Spool Size Capacity
4" & 8" (100 & 200 mm)
Power Source Weight
32.2 lbs (14.6 kg)
Primary Power
Primary Voltage
120 VAC
Supply Voltage Range
95 – 140 VAC
Number of Phases
Single Phase
Supply Frequency
50/60Hz
Power Cord
10 ft (3 m)
Designed to be the perfect small welder, the Fabricator 141i
connects to 120 VAC primary power and offers 10 to 140
amps of power for MIG and Lift TIG welding. It also delivers
90 amps of power for Stick welding with general-purpose
electrodes like E6011 and E6013. Ideal for welding material
up to 3/16" thick, this fully integrated system incorporates a
built-in gas solenoid valve and wire feed system that accepts
4" or 8" spools of wire for MIG welding.
Features:
§ Inverter Technology for optimized arc performance with all
welding processes
§ Easy-to-Use Digital meters make setting parameters a snap
§ MIG Inductance and Stick Arc Force controls to fine-tune the
arc makes welding easier, whether you’re a novice or a pro
HERTZ
60
50
MIG STICK
HF TIG
TIGFLUX-CORED
INPUT POWER
1
PHASE
3
YEARS
WARRANTY
1
YEAR
WARRANTY
VOLTAGE
120/230
VOLTS
STICKHF TIG LIFT TIG
PAW
PLASMA
HERTZ
60
50
MIG STICK HF TIGTIGFLUX-CORED
INPUT POWER
1
PHASE
3
YEARS
WARRANTY
1
YEAR
WARRANTY
VOLTAGE
120/230
VOLTS
STICKHF TIG LIFT TIG
PAW
PLASMA