Electric Oven Service Manual

13
- ---> (R1) moves the cursor to the right.
The cursor starts at the far left character.
If ---> is pressed when the cursor is on the
far right character, the cursor moves to the
far left character.
- <--- (L1) moves the cursor to the left. The
cursor starts at the far left character.
If <--- is pressed when the cursor is on the
far left character, the cursor moves to the
far right character.
3. Press save (R3) to save the changes or cancel
(L3) to cancel any changes.
Adjusting the Belt Speed
Figure 7
The High h Conveyor Oven can accommodate
either one or two conveyor belts. The oven will
automatically detect the number of conveyor
belts installed and display the option to change
the speed of each conveyor belt independently.
1. Press the soft key adjacent to the conveyor
belt you wish to adjust (press L2 for the
front belt [Belt F] or L3 for the rear belt
[Belt R]).
2. Adjust the time it takes for the conveyor
belt to completely cycle through the oven.
- The up key increases bake time in
5-second increments.
+ Flex option enabled: the user can only
increase the time up to an additional
15 seconds.
- The down key decreases bake time in
5-second increments.
+Flex option enabled: the user cannot
decrease the time by more than 15
seconds.
3. Press the soft key adjacent to the belt that
was adjusted to exit the belt speed controls.
Adjusting the Temperature
Figure 7
1. Press R2 to access the temperature controls.
2. Adjust the temperature.
- Press the up key to increase the
temperature in 5°F/5°C increments.
+Flex option enabled: the user can only
increase the temperature up to an
additional 10°F/5°C.
- Press the down key to decrease the
temperature in 5°F/°5C increments.
+Flex option enabled: the user cannot
decrease the temperature by more than
10°F/5°C.
3. Press R2 again to exit the temperature
controls.
Adjusting the Top and Bottom Air
Figure 7
1. Press R1 to access the top air controls, or
R3 to access the bottom air controls.
2. Adjust the air speed.
- Press the up key to increase the air speed
in 5% increments up to 100%.
+Flex option enabled: the user can only
increase the air speed by up to an
additional 15%.
- Press the down key to decrease the air
speed in 5% increments down to 30%.
+Flex option enabled: the user cannot
decrease the air speed by more than
15%.
- Press the soft key again to exit the air
controls.
STANDARD OVEN OPERATION