Electric Oven Service Manual

12
Mode 8: Idle
Mode during which both blowers are reduced
to 30% to save power. All other oven
components remain the same.
Happens When...
-The user presses the idle key from MODE 6.
Goes To...
-
MODE 6 when the user presses the idle key, up
key, down key, or any soft key.
-
MODE 7 when the user presses the back/off key.
Mode 9: Cool to Light
Mode during which the burner assembly shuts
off to allow the oven to cool to the set cooking
temperature defined by the profile that was
selected.
Happens When...
-The user selects a cooking profile from
MODE
1 or 7 that has a set cooking temperature lower
than the oven’s current temperature.
Goes To...
-
MODE 3 when the oven has cooled to the set
temperature of the current cooking profile.
-
MODE 7 when the user presses the back/off key.
Editing a Cooking Profile
To edit a cooking profile, the oven must be in
the
COOKING MODE and the full edit or flex
option must be enabled. For more information
on selecting between full edit, rigid, and flex
options, see Edit Options Screen on page 16.
When the rigid option is enabled, the soft keys
displayed in Figure 7 are disabled and no menu
editing is allowed.
When the full edit option is enabled, a cooking
profile is fully customizable and all changes are
saved once the oven returns to the
OVEN OFF or
COOLING DOWN MODE.
When the flex option is enabled, a cooking
profile is customizable within flex option
limitations (as described in the following
sections), and all changes will reset when the
oven returns to the
OVEN OFF or COOLING
DOWN MODE
.
This section assumes that the full edit option is
enabled (except where otherwise noted) and
that a cooking profile has been enabled.
Changing a Cooking Profile’s Name
The full edit option must be enabled to change
a cooking profile’s name.
1. From the cooking screen (Figure 7), press
L1 to access the name change screen
(Figure 8).
2. Change the name of the cooking profile.
- The up key moves up through the
available characters. e.g. A,B,C…
- The down key moves down through the
available characters e.g. A,+,-, ,9,8,…
- INS (L1) inserts a space.
- DEL (R1) deletes the selected character.
STANDARD OVEN OPERATION
PROFILE 1
BELT F
5:00
BELT R
3:20
TOP AIR 80 %
SET
COOKING
475F
BTM AIR 100 %
INS
CANCEL
DEL
<--- --->
SAVE
[PROFILE 1 ]
Figure 7: Cooking Screen
Figure 8: Name Change Screen
L1
L2
L3
R1
R2
R3
L1
L2
L3
R1
R2
R3