Installation Sheet
14
OPERATING INSTRUCTIONS
Level and set your merchandiser in place. Connect all necessary electrical connections. 
Your Open Display Merchandiser should now be ready for use.
POWER SWITCH:
Located at the bottom of front panel, colored in red.
LIGHT SWITCH:
Located at the bottom of front panel, colored in green. 
TEMPERATURE CONTROL:
Located at the bottom of front panal, 
THERMOMETER:
(TOM-36DX, TOM-36E, TOM-40, TOM-48DX, TOM-48E,TOM-50, TOM-60DX, TOM-60E, TOM-72DX, 
TOM-72E, TOM-96DX, TOM-96E)
Thermometer showing temperature is located on the left side of the back panel .
(TOM-40M, TOM-50M, )
Thermometer showing temperature is located on the right side of the back panel . 
PRODUCT PLACEMENT:
Overloading of product or placing products against the back wall or suction grill may cause. 
disruption in air flow, which may cause the unit to not cool properly.
NOTE:
• Do not place products into your merchandiser until the desired temperature is reached.
• Do not place hot products into the merchandiser.
H
OW TO SET THE TEMPERATURE
1. 
Press the SET button         for 1S to check the temperature setting.
2.  The display panel shows the current temperature setting. 
3. 
To change the temperature, press the UP              or DOWN             button and press the SET
           button when adjustment is complete.
4. 
The  temperature  setting  has  been  changed  and  the  display  panel  shows  the  current 
temperature.
M
ANUAL DEFROST
      1. 
Press the DEFROST button             for 3S to begin a manual defrost.
      2. 
Defrost mode will be off automatically when it is complete
      3. 
During the defrosting process, pressing the DEFROST button     for 3S will stop   
           defrosting and turn off the defrost mode.










