Installation Sheet

12
Turbo air
INSTALLATION OF DIVIDERS (BOTTLE COOLER)
* Note :
The shape and quantities of the dividers can be different according to the
model number.
'A'
'B'
'C'
1) To re-position dividers, push backwards.
2) Spring located at point 'C' will be shorten to about 1/2 inch.
3) Front of divider will be able to remove from point 'A' and 'B'.
4) Position divider in the hole, point 'C' where you would like it.
5) Push divider backwards.
6) Insert front of divider in the holes, point 'A' and 'B', where you would like it.