Refrigerator User Manual

8
Turbo air Speeds UP the Pace of Innovation
3. Pull the Louver toward you.(②)
4. Pull on the downward. (③)
5. Brush the dirt, lint, etc from the finned condenser coil.
6. When finished, Louver installed by reverse way of removing
7. Reconnect the electrical power to the unit.
8. Condenser should be cleaned every 1 months or as needed.
EVAPORATOR COIL
1. Remove the glass door and Boottom shelf.(①)
2. Join the drain hose.(②)
3. Sweep evaporator pins with warm water and brush.
4. Clean up with soft cloth the evaporator pins.
5. When finished cleaning off properly, remove the drain hose.
6. Reconnect the Glass door and Bottom shelf.
TROUBLE SHOOTING
For any problems with Display, please refer to following check list. If still having a
problem or need to ask a question please call Customer service at 1-800-381-7770.
DISPLAY NOT WORKING
aa.. CChheecckk ppoowweerr ggooiinngg ttoo uunniitt..
bb.. CChheecckk ppoowweerr sswwiittcchh iiss oonn..
DISPLAY CASE WARM
aa.. CChheecckk ccoonnddeennsseerr ttoo sseeee iiff cclleeaann..