User Manual

Instructions for use
Wall-plug WiFi extender
Product indicator and Interface button
Product Applications
Power
Indicator
Network port Indicator
Cable port
Reset button
WPS button
Signal Indicator
WPS Indicator
Product introduction
FAQ
Ver 3.01.15001
Signal expansion
Broad coverage
RESET
WPS
POWER
LAN
WIFI REPEATER
SIGNAL
WPS
Wireless Expander is widely used in large space to
improve wifi coverage，effective expansion of WiFi signal,
easy to use.
POWER
LAN
WIFI REPEATER
SIGNAL
WPS
POWER
LAN
WIFI REPEATER
SIGNAL
WPS
Q:Can not connect network after the installation
successful?
A:Please check the password is correct, if not, please
enter the correct password.
Q:Why network speed is very slow after expanding the
signal?
A:Please ensure that the wifi signal before the relay
network speed is normal,check the distance between
the device and the router is appropriate,please adjust
the placement of this product,
Q:How to restore the range extender to its factory default
settings?
A:In the case of wifi extender connection power supply,use
tip shaped object(Such as paper clips, a toothpick)
inserted into the reset hole for 5 seconds,until the lights
go out after loosening,wait for the light to turn on when it
is normally on.
Q:What should I do if you can not open the settings
interface?
A:Please try the following measures:1. Ensure that the
device is powered on, the indicator is normal display;
2. the device is connected to the product's wireless
network.3. mobile phone or computer network IP
address is set to automatically obtain; 4. replace the
other browser to try again.
Product setting
WPS quick setting
Cellphone setting
1.Connect this product near your router and power on to
make it work properly.
2.Press the router WPS button to enable the WPS
function of the router（Please refer to your router manual
WPS connection specific operation）.
3.Then press the WPS button on the side of the
product.the light on the device will turn off and then on
again,this product is restarted,then the WPS pairing
success after the corresponding indicator light,WPS
connection is successful.
4.WPS after the success of this product can be moved to
a distance（Area covered by the router signal）,then
expand the signal coverage.
Make sure that you want to repeater expansion is
your router signal and the router with WPS function,If
you do not have this function you can skip this step.
If you do not WPS connection or WPS connection can
not be successful,can use cellphone connected to the
device default wifi,enter the device management
interface to connect.
Tips:
1.If the device is on the wrong wifi router when the WPS button is
pressed,Please reset and match it.
2.If the WPS match failed, set through the following operation.
Precautions:
1.In the thunderstorm it is recommended to unplug it,to prevent
lightning damage.
2.Away from the power, keep the ventilation.
3.Do not subject the product to strong shock or vibration to
prevent damage to the product.
4.Do not disassemble or modify this product without permission.
5.In storage, transportation and operating environment, please
pay attention to water.
6.Microwave ovens, Bluetooth devices, refrigerators, etc. can
seriously interfere with the wireless signal, please try to place
in a spacious and accessible area, and away from the above
equipment.
7.Access to the normal voltage and current of the home circuit.
1.Open the cellphone WiFi
settings interface,search and
connect to a wireless network:
TuoShi_xxxxxx (xxxxxx is a
random number).
2.Connected to the default wifi, pop-up login to the
wireless network, click to enter or open the cellphone
browser,Enter the URL：192.168.18.1,into the
management interface,Click on the interface "Start
Settings" button,the amplifier will start to automatically
scan the surrounding wireless network.
TuoShi_xxxxxx
Net-6dtT
GCB
WIFI001
WIFI002
WIFI003
WIFI004
WIFI005
WIFI006
3.In the search of the
wireless network, select the
need to expand the wireless
network name,for example：
GCB.Set wireless signal
amplification
4.Enter the wireless
password (the password is
to expand the wifi
password,for example, you
want to extend this GCB
wifi,you need to know this
password),Click "NEXT".
WiFi Extender Setting
Choose your WiFi name
The Extend WiFi name is:GCB-Plus.
WiFi name : GCB
Password :
Extend your WiFi signal
NEXT
Note:Tick the box,then a new WiFi name
GCB-Plus will be created.If not,extended WiFi
name will keep the sameGCB.
WiFi Extender Setting
Choose your WiFi name
Extend your WiFi signal
Refresh
Note:Please select the network you want to
extend.If you do not find it,please refresh and
try again.
GCB
WIFI001
WIFI002
WIFI003
WIFI004
Manually input the WiFi name
Settings finished!
Original WiFi name: GCB
New WiFi name: GCB-Plus
WiFi password:
Finish Settings
If you want to config the wifi repeater again,please
press reset button on device to make factory default
firsh.
5.Wait a moment, complete
the setup, prompt the
extended wireless name and
wireless password in this
interface,open the phone wifi
settings interface, scan and
connect your extended wifi
name plus suffix "-Plus"
signal,you can use the
network normally.
Status of indicator lights as follows:
Tips:
After completed set up,in order to obtain good amplification
effect,please put the wifi extender in appropriate distance from the
router and the internet equipment.(After insert and pull out extender
don't need to reconfigure ).It is recommended to extend the extender
antenna perpendicular to the horizontal for good coverage.
Extended successful,
in appropriate distance from the router/main AP
Extended failure
Extended successful,
too far from the router/main AP
Signal light keeps on
Signal light put out
Signal light flashing
Cable
Press the router
WPS button to
enable the WPS
function of the
router
Press the WPS
button on the side
of the
device,make a
quick connection.
Repeater signal is the wifi name of your router plus suffix
-plus,the extended WiFi password is your router's password.
Q:Network cable connection device can not access the
Internet?
A:Make sure that the expander has relayed the signal
normally and that the device at the network cable end
has set the IP address automatically.
Q:Why do I find that I can not find the page during setup?
A:Some mobile phones may intelligently detect whether
the connected WiFi can access the Internet or not.
During the setting, the WiFi may be disconnected. You
only need to check the wifi you are connected to. If the
connected WiFi is not transmitted by the device, you
just need to reconnect and refresh the page Can be.
1 2
折后尺寸：60 x 90 mm
印刷工艺：四色彩色印刷
材质：128G 铜版纸
已做出血线
60 mm
90 mm
风琴折，虚线为折痕，无需印出。
材质工艺要求
物料号
名称
版本号
尺寸：如上图标示
材质：如有标出按文件 如无则按下单需求
无
插墙扩展器英文说明书
v3.01.15001