User Manual

ManualsBrandsTUOSHI ManualsComputers & AccessoriesUnlocked 4G LTE Router with SIM Card Slot -Wireless WiFi CPE, Mobile Hotspot, Wireless WiFi Router, Support T-Mobile and ATT (4 Antenna)

Instruction Manual

Thanks for choosing our product, please read this instruction

manual carefully before using, use the steps to operate this

product. Keep it in safe place for future use after reading.

Insert SIM card

Insert SIM card and Connection method

Plug power adapter power on to boot router

Use router wifi signal

Turn on your cell phone wifi and search wifi name LTE-WiFi_XXXX,

input wifi password stating on the label of back router (Each product

got certain SSID name and password, you can find these information

on rating label), connected to wifi network.

According to the interface identification on the device, insert the

SIM card, pay attention to the metal electric shock and the

missing direction of the card.

Please insert sim card and connect correctly 1: Insert SIM card on

right position of router 2: Power on power adapter and connect to

router 3: Suggest using cell phone for configure settings, no need

cable. If you want to use computer for configuration you need

connect router lan port to computer, make sure connection is

correct, computer use dynamic IP obtaining.

Reminding:

After router power on it will transmit

default wifi LTE-WiFi_XXXX, cell

phone just connect this wifi. If you

did not find this wifi network please

check SSID and password on label,

or reset router. How to reset router

please refer FAQ 1.

LTE-WiFi_XXXX

Password：* ****** *

Congratulations

You can use SIM data to surf internet now!

Warm tips, you can use the computer to set up 1: Set up a

computer to automatically get IP 2: Computer network interface

connecting router LAN port 3: The address bar of the computer

browser is entered into 192.168.188.1, opens the router

management interface, and enters the default account and

password to set it up. If you are not familiar with computer,

use cell phone to set it up.

192.168.188.1

192. 168.1 88.1

192 .168. 188.1

192.168.188.1

3: In the background login page, enter the default account

admin and password admin to enter the router management

backstage interface.

2: Scanning QR code, using mobile browser

to open links or manually enter

192.168.188.1 in the browser address bar to

enter management backstage.

1: Use the cell phone to connect the default

WIFI signal transmitted by the router. See

step 3 of insert and connection mode by

using the router WiFi signal.

Wifi Name and password settings

SIMcard

MicroSIMcard NanoSIMcard

cable

4G Wireless Router

Corner inward

Chip down

Ver 4.06.19001

Summary of content (2 pages)

PAGE 1
3 Insert SIM card and Connection method 1 4G Wireless Router Insert SIM card According to the interface identification on the device, insert the SIM card, pay attention to the metal electric shock and the missing direction of the card.
PAGE 2
4: In the router management background, click on the navigation bar "LAN Setting" -> "Wi-Fi 2.4G", enter the name of what you want in the network name, and select AES in the "WPS password policy" and enter the password you want in WPA-PSK, click the application button to confirm the setting. Warm reminder: after the installation is completed, your cell phone WIFI connection may be disconnected, reconnect the name you set, and enter the password you set to connect.