Operation Manual

GB
OWNER’S MANUAL
•
GO RUN 15
5
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord
into the treadmill at the left front corner.
Before connecting the device to a power
source, make sure that local voltage
matches that indicated on the type plate.
The treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electrical current to reduce
the risk of electrical shock.
This product is equipped with a cord
having an equipment-grounded
conductor and a grounding plug. The
plug must be plugged into an appropriate
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances. Do not use
extension cables when connecting the
equipment to the power source.
DANGER!
Improper connection of the equipment
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman, if you are
in doubt as to whether the product is
properly grounded.
Do not modify the plug provided with the
product - if it will not fit the outlet, have
a proper outlet installed by a qualified
electrician.
SAFETY TETHER KEY
The treadmill cannot be used if the
tether key is not properly installed on the
console; if the key is removed from its
place, the treadmill will immediately stop.
Place the safety tether key in its place on
the console. Ensure that the clip of the
safety tether key is properly attached to
your clothing; as the cord tightens, make
sure the clip does not detach itself from
your clothing before the safety tether key
disconnects from the console.
Console
SAFETY KEY:
The monitor and the treadmill can be
operated only with the key attached on
the SAFETY KEY button and both of the
monitor and the treadmill stop as soon
as the key is removed.