User's Manual

TuneUp Utilities 201 4 © 20 13 C opyright A V G Tec hnologies C Z, s.r.o. A ll rights res erved. 34
Current status
In the Current status column to the right, there is further information about the current status of a program.
Permanently enabled
The program is fully functional and is causing a system load even when you are not using it.
Disabled until program startup
The program is fully disabled and will not cause any load on the system until you start it again
manually. It will be disabled again afterwards.
Disabled after idling or restart
The program cannot be turned off during normal operation; Program Deactivator will disable it
automatically the next time the computer is idle or the system is restarted.
Disabled after restart
The program cannot be turned off during normal operation; Program Deactivator will disable it
automatically the next time the system is restarted.
Cannot be disabled
This is a program that Program Deactivator has classified as relevant for the security or proper
operation of your system and the disabling of which could have serious consequences. Therefore, it is
not possible to disable it.
Does not cause system load
The program cannot be disabled because it does not have a negative impact on the system load.
Changing Settings
If you have turned off the setting Disable again automatically when closed (recommended) under
Program Deactivator in the Settings, your programs may have the following status:
Current status
Enabled
The program is fully functional.
Disabled
The services of the program that run continuously in the background have been turned off.
Scheduled to be disabled
The program will be disabled automatically as soon as this is possible.