User's Manual

TuneUp Utilities 201 4 © 20 13 C opyright A V G Tec hnologies C Z, s.r.o. A ll rights res erved. 28
7.4.2. System Restore
Start the TuneUp Rescue Center module by clicking Undo changes button that can be found in the
Dashboard category of the Start Center (Rescue Center area)
Alternatively, you can start the module by going to All functions in the Start Center and selecting the Undo
changes entry under TuneUp Utilities.
Click on System Recovery.
In the right-hand column, TuneUp Rescue Center shows you a list of all stored backups and also the time at
which each entry was changed.
Create Backup
Use this button to create a system restore point. Give this point a name by which to remember this system
status at a later time.
Since a system restore point saves the status of your configuration and system files, you are advised to
create a system restore point before making any significant changes to the system (such as installing a
program). If something goes wrong during installation or your computer no longer works the way it used to, you
can always restore it back to its original status at any time.
Since a system restore point saves the status of your configuration and system files, you are advised to
create a system restore point before making any significant changes to the system (such as installing a
program). If something goes wrong during installation or your computer no longer works the way it used to, you
can always restore it back to its original status at any time.
Delete
If you are quite certain that you no longer need a backup, you can delete it permanently using this button.
Restore
Use this button to restore the system to its status before the selected backup. You will need to restart your
system.
This function is useful if your computer no longer functions properly following a change to the system.
First, select a restore point that is as recent as possible, in order to avoid undoing too many system changes.
7.4.3. Changing Settings
You can change some of the settings of the TuneUp Rescue Center. In the TuneUp Rescue Center click
on the Settings button.
Alternatively, you can enter these settings from the Start Center. In the Menu Bar, click Settings and find the
Rescue Center protection item (in the list on the left side of newly triggered configuration dialog).
Rescue Center Protection