User's Manual

Check Again
Sometimes, the Check again button appears and the wizard recommends that you check your system again. This
always happens if new entries in the registry have been made invalid by the cleanup. This is not an error in the
module, but a chain reaction that can occur primarily in the Program components and File types areas.
Example:
In the registry, entry A points to entry B, which in turn points to the missing file X. In the first scan, TuneUp Reg-
istry Cleaner determines that entry B is invalid because file X cannot be found. Entry B is deleted during cleanup.
This in turn makes entry A invalid, as it points to the now deleted entry B.
1. Click Check again.
These two categories alone will be analyzed again.
2. Click Finish to close the wizard.
Repeat the cleanup as often as required. As soon as no new problems are found, you can exit the module -
with the confidence that you have removed a great deal of junk from your system.
Functions for Advanced Users
If you are sure that you want to exclude individual areas from cleanup, or want to look at the entries in the reg-
istry or even edit them, you will find the following functions useful:
Ignore Problems
You can remove individual problems from the list so that they are not found by the analysis.
For this, perform the following steps:
1. Select a problem from the list of corresponding areas.
2. In the Edit menu, select Ignore problem.
You can also get to this function using the list entry context menu.
Include Ignored Problems Again
If you no longer wish to ignore a problem, you can add it back to the analysis.
For this, perform the following steps:
1. In the File menu, select Ignored problems.
2. Highlight it in the list and click Remove.
Show Entries in the Registry
From the detailed problem list for an area, you can go straight to the relevant entry in the registry for every prob-
lem.
For this, perform the following steps:
1. Select a problem from the list.
2. In the Edit menu, select Problem details and Go to key.
You can also get to this function using the list entry context menu.
Editing the Registry
In the toolbar, click Registry Editor to directly call up the TuneUp Utilities module for editing the registry.
TuneUp Utilities Manual 62