User's Manual

Undoing Changes
The following chapters explain how to use the TuneUp Rescue Center module to undo changes that you made
with TuneUp Utilities.
You can also use TuneUp Rescue Center to perform system recoveries, i.e. undo changes that you did not make
with TuneUp Utilities.
Introduction
Since you can make comprehensive changes and edits to your system with TuneUp Utilities, it can often
happen that you want to undo a change at a later time.
You can do this with the TuneUp Rescue Center.
System Recovery
The TuneUp Rescue Center even lets you undo changes made not by TuneUp Utilities but by other appli-
cations. TuneUp Rescue Center offers integration with the Windows system recovery function for this.
Windows regularly creates restore points. Should your system stop behaving as it should , you can revert at any
time to one of the restore points. The previous system status is then restored and any changes made after this
point are lost.
Where Can I Find the TuneUp Rescue Center?
The TuneUp Rescue Center is always within reach:To access the TuneUp Rescue Center, press Undo changes at
the bottom left of the TuneUp Utilities Start Center. This button is also found in the individual modules.
How to Undo Changes
Start the TuneUp Rescue Center module by clicking Undo changes at the bottom left of the Start Center.
Alternatively, you can start the module by going to Overview of all functions in the Start Center and selecting
the Undo changes entry under TuneUp Utilities.
TuneUp Utilities Manual 38