User's Manual

Showing System Information
In the following chapters, you will find out how you can use the TuneUp System Information module to dis-
play system information.
Introduction
TuneUp System Information looks into your computer and collects all sorts of facts and information about
your hardware and software and your computer's performance.
This information is important if you wish to upgrade your computer or if an engineer asks you whether certain
components are installed on your computer.
How to Show System Information
Launch the TuneUp System Information module by going to the Fix problems category in the Start Center and
selecting Show system information from the Manage processes and show system information area.
Alternatively, you can start the module by going to Overview of all functions in the Start Center and selecting
the Show system information entry under Computer.
The facts about your system are displayed on the following nine tabs:
Overview
The overview displays summarized information on the most important components of your computer. This
quickly shows you what processor is installed, the system RAM, the graphic card performance, the mouse in use,
and any available information regarding the disk drives.
Windows
Here you can find out what version of Windows and of Internet Explorer you are using and when you last
booted your computer.
TuneUp Utilities Manual 102