User's Manual

Clean up Windows
65
Once the module is finished, a message is displayed to tell you that all problems have been
corrected.
Sometimes, the button Check Again is displayed, and the wizard recommends that you
analyze your system again. This is always the case when the clean-up may have made
additional entries invalid. This is not an error in the module, but a chain reaction that can
occur in the categories ActiveX and COM and File types.
Here is a simplified example: Entry A in the registy points to entry B. Entry B in turn points
to a no longer existing file X. During the first pass, TuneUp Registry Cleaner recognizes that
entry B is invalid because file X is missing. Entry B is therefore removed during cleaning.
But now entry A is invalid because it points to entry B, which was removed during the first
pass.
When TuneUp Registry Cleaner recognizes that such a situation can occur, it suggests
checking the registry again. If this happens, click Check again
Click
. Only the affected
categories will be analyzed again.
Finish
Here, you can
watch while the
module cleans up
your system.
to close the wizard. Repeat the clean-up process as often as necessary until no
new problems are found. You can now close the module, with the confidence that you have
removed a great deal of junk from your system.
Chain reaction in
the registry: the
Check again
All's well that ends
well.
button