User's Manual

Increase performance
16
finds drives that should be defragmented, the module will automatically start
defragmentation after the analysis is complete.
If the option is not selected, defragmentation will need to be started manually. In
this case, wait to see the results of the analysis. The drives that need to be
defragmented will be selected automatically. Simply click on a drive in the list to
see the corresponding drive usage map. You can select or deselect drives for
defragmentation with a checkmark. Then, start defragmentation with Next.
The module will then analyze the drives. A yellow arrow in front of an entry
indicates that the drive in question is currently being analyzed. A green
checkmark tells you that analysis of the drive is complete. The percentage next to
the drive shows you the progress the module has made.
Colors in drive usage map
The drive usage map shows fragmented files in red and non-fragmented files in
blue. Free space is shown in white and locked (= non-movable) files are shown
in dark violet.
Drives are being defragmented
The program shows the current drive usage map for the hard disk partition in
question as long as any drive is still being defragmented. The drive usage map is
shown in real time, which allows you to watch as TuneUp Drive Defrag makes
visible progress.