User's Manual

Optimize and Improve
If you find the default setting too conservative, you can select
Use manual settings to specify the desired processor load in
percent up to which the module can optimize your memory
usage. The higher this limit, the more aggressively TuneUp
MemOptimizer will optimize your system.
How to cause the
module to optimize
more frequently
Click OK to activate your settings. If you wish to restore the
module to the recommended settings, click Recommended.
Manual Optimization
If you do not use AutoOptimize, or if you want to free up
memory before you start a program that requires a lot of
memory, you can go to Manual Optimization.
Under Clear manually, you can use the slider to specify how
much memory should be freed. Click Clear Now to free the
specified amount of memory. The module will then remove
unneeded DLLs and other files from physical memory, which
may require a few seconds.
Under Clipboard, the module shows the current amount of
memory occupied by the data in your clipboard. Click Empty
Clipboard to free up the memory used by this data.
74 TuneUp Utilities 2004