User's Manual

Clean up and Repair
Here, you can watch
while the module
cleans up your
system.
Once the module is finished, a message is displayed to tell
you that all problems have been corrected.
Sometimes, the button Check Again is displayed, and the
wizard recommends that you analyze your system again. This
is always the case when the clean-up may have made
additional entries invalid. This is not an error in the module,
but a chain reaction that can occur in the categories ActiveX
and COM and File types.
Chain reactions in
the registry: the
Check Again button
A simple example: Entry A points to entry B, which in turn
points to the missing file X. In the first scan, TuneUp
RegistryCleaner determines that entry B is invalid because
file X cannot be found on the system. Entry B is deleted
during clean-up. This in turn makes entry A invalid, as it
points to the now missing entry B.
TuneUp RegistryCleaner recognizes when this may happen
and suggests that you analyze the system again. In this case,
click Check Again, and these two categories will be analyzed
again.
Click Finish to close the wizard. Repeat the clean-up process
as often as necessary until no new problems are found. You
can now close the module, with the confidence that you have
removed a great deal of junk from your system.
All’s well
that ends well.
64 TuneUp Utilities 2004