User's Manual

10
2. Software Installation
Before you can use TuneUp Utilities on your computer, you have to
install the software. During installation, program files are transferred to
the hard disk. You can then start and use the Utilities without inserting
the program CD into your CD-ROM drive.
Starting the Installation
If the Autoplay function is enabled for your CD-ROM drive, the
TuneUp Utilities installation routine will start automatically. In this case
Windows attends to calling the file.
If the Autoplay function is disabled on your computer, nothing happens
after inserting the program CD into the CD-ROM drive. In this case, use
Explorer or some other file management program to run the file
SETUP.EXE in the root directory of the CD-ROM. To do this, double-
click on the file.
The installation routine will now welcome you. Right at the beginning
you are asked to close all other open Windows programs. To do this,
switch to these applications with ALT+TAB and close them with the
shortcut ALT+F4. This way, possible disturbances and interferences
during the installation are prevented. In addition, TuneUp Utilities now
can also update and overwrite system files which might otherwise have
been in use. Press the Next button to proceed.