, USER S MANUAL RATTAN BAR SET 6 SEATER A0008-BLCC
Contact Us! Need Help! Do NOT return this item. Contact our friendly customer service department for help first. Before You Start Please do not exceed the weight limitation of each items Do not stand on or use any part of this item as step ladder Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
I F I E F G J D A B G H H C B Notice: 1. 50% Tighten before xing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a at ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part List & Hardware A B Seat frame ( 6 pcs) D C Feet frame ( 12 pcs) E Table top frame ( 1 pc) G F Table top frame ( 1 pc) J Table supporting frame ( 2 pcs) 1 2 Cushion ( 6 pcs) 3 Bolt M6x40mm ( 28 pcs) 4 Bolt M6x20mm ( 56 pcs) Inner table top frame ( 2 pcs) I H Table leg frame ( 2 pcs) Connecting frame ( 12 pcs) Allen key ( 1 pc) 4 Glass ( 2 pcs) Bolt M6x35mm ( 24 pcs)
STEP 1 Connect Seat frame (A) & 2 pcs Feet frame (B) with bolt (1) STEP 2 Connect part frame STEP 1 & 2 pcs Connecting frame (C) with Bolt (3) B B x6 x6 3 3 3 3 C 3 3 3 3 C 1 1 1 1 1 3 4 pcs A 80% 80% 8 pcs STEP 3 Put on Cushion (J) to complete chair.
STEP 4 Connect Table top frame (D) & (E) with Bolt (1) & (3) x1 E 3 D 3 1 1 1 3 80% 2 pcs 2 pcs STEP 5 Connect part from STEP 4 & Inner table top frame (F) with Bolt (1) & (2) x1 2 F 2 2 1 2 2 F 2 2 1 1 2 2 80% 2 pcs 16 pcs 6
STEP 6 Connect part from STEP 5 & 2 pcs Table leg frame (G) with Bolt (2) G x1 G 2 2 2 2 2 2 2 2 2 80% 8 pcs STEP 7 Connect part from STEP 6 & Table connecting frame (H) with Bolt (3) x1 3 3 H 3 3 3 H 3 80% 6 pcs 7
STEP 8 Put on Glass (I) to complete table.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
