User`s manual

29
users can choose to shut down the system without shutting down the monitored
UPS.
Local system shutdown when UPS is at low battery level: When clicking this
checkbox, local PC will shut down when monitored UPS battery is running low.
1. UPS shut down based on UPS model: Only >3KVA standard UPS model will
automatically shut down. However, long-run models and UPSs with above
5KVA will remain on.
2. UPS will shutdown immediately: UPS will shutdown immediately no
matter what kind of UPSs.
3. UPS is still on: UPS will remain on until battery is running out.
Accept shutdown command from remote system: When clicking the checkbox, it
accepts shutdown command from specific remote PCs. Please enter IP address
of remote systems in blank column and click “Add” button to add into list.
Allows local system shutdown when UPS is scheduled off: When clicking this
checkbox, the local system will shut down before monitored UPS is scheduled to
power off. The default setting is clicked.
Power-off option: Selecting power-off method for above shutdown system.
Shutdown: When clicking the checkbox, the selected system will shut down. The
default setting is clicked.
Sleep mode: When clicking the checkbox, selected system will suspend the
system instead of a normal shutdown. But this function is only supported by
Windows 2000 or higher on supported hardware.
Delay time to shutdown system: Enter the delay time to shut down the
operating system. The value range is from 1 to 99 minutes.
On shutdown execute file: Enter the path of execute file.
Warning Dialog Setting:
Pop-up dialog before shutdown: Timer setting for pop-up warning dialog
displayed in local PC. Local PC will pop up a warning dialog before system
starts to shut down. The range is from 1 to 999 seconds.
Warning dialog interval: Reminding dialog interval setting. This setting also