User`s manual

Step 1 Select UPS Setting >> Local Shutdown or click shortcut icon . Refer to

Diagram 5-11.

Diagram 5-11

NOTE: This screen may be different for different types of UPSs.

Step 2 Select shutdown conditions and power-off options, set delay time to shutdown

system.

Step 3 Enter time for pop-up dialog before shutdown and warning interval in Warning

Dialog Setting area.

Step 4 Click “Apply” button to save all data.

NOTE: Click “Default” button to recover the default setting.

Conditions:

 UPS works on battery mode Local system shutdown after xx min xx sec: When

clicking the checkbox, local PC will start to shut down after monitored UPS works

on battery mode for xx min xx sec time. The maximum setting number for

minutes is 999, and for seconds is 59.

 UPS shutdown while system shutdown: When click the checkbox, monitored

UPS will shut down after local system shuts down. The UPS shutdown time will

be later than system complete shutdown time. The default setting is clicked. But