User`s manual

Step 2 Add: Enter MAC address and click “Add” button to add in MAC List. Delete:

Select one from list and click “Delete” button. Test: Select one from list and

click “Test” button. Then it will execute Wake-on-LAN test.

NOTE: The MAC address format example: 01-1F-C6-C7-E0-08.

5.1.6. Com.Port Plug And Play Setting

To real-time monitor UPS device, the software will scan each com. port anytime. In this

way, it will occupy com. port. This function will release some com. ports which not

connect to UPS devices. To avoid any improper operation, in-used com. ports will

display in disabled grey icons. Users can select “Allow scanned” or “forbid scanned” to

re-scan or release com. ports based on their requirements.

Step 1: Select ViewPower configuration>>Com.port plug and play setting. Refer to

Diagram 5-8.

Diagram 5-8

Step 2: Click “Refresh” to reload the status of com. ports.

Step 3: Click “Forbid scanned” to stop scanning on this com. port. Click “Allow scanned”

to start scanning on this com. port.

5.1.7. Log Setting

Users can set up “Record Interval”, “The max. Numbers of logs for historical data”, and