User`s manual

10
If port conflict occurs, you may modify value of tray port. The default setting for
tray port is listed as below (Refer to section A in Diagram 3-1):
 Web Service port: 15178
 Web service shutdown port: 8005
 AJP port: 8009
You may modify the value of tray port to any number between 0 to 65536. If
value entry is used, the system will remind users to enter another number
again.
NOTE1: Please do NOT modify port value unless port conflict occurs. This
modification will affect remote monitoring website. For example, if changing web
service port to 15177, then the remote monitoring website will change to：
http://xxx.xxx.xxx.xxx:15177/ViewPower
NOTE2：To avoid possible conflicts, please do NOT enter value with at least 4 digits.
3.3.2. Software Upgrades
Refer to section B in Diagram 3-1 for the detailed configuration for online
upgrade:
 Specify the URL for update files: This is the directory to online update
software. Please do not change it unless it’s instructed by software vendor.
 Save files to: The directory to save files.
 Online auto-update: If selected, it will automatically check if there is any
new version launched online every 1 hour.
 If applying online upgrade, please follow below for configuration:
1. Select “Apply the proxy configuration”;
2. Enter IP address and port of server;
3. If ID identification is requested, select “Enable authentication” and enter
User Name and Password.
 Connection test: Click this button to test if all configurations are set up well.