User`s manual

9
Shortcut icon ViewPower icon
3.1. Start Monitor
This software will be automatically activated when installing it as service application.
At this time, users can remote monitor the ups through web browser even though users
do not login in operation system.
If service application can not be registered successfully, when starting up service
tray service, it will automatically activate monitoring application. If it’s failed or stopped
manually, simply click “Start Monitor” to activate it.
“Start Monitor” will check if monitoring application is registered as service
application. If it’s successfully, this software will be activated from service mode. If not,
this software will be activated as monitoring mode. Users can identify the application
mode from tray icon as below:
 Monitoring application is not activated successfully:
 Monitoring application is activated as service mode:
 Monitoring application is activated as application mode:
3.2. Stop Monitor
Click “Stop Monitor” to stop monitoring application.
3.3. Configuration
3.3.1. Port Modification