User manual

2. Installation and setup

NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is

damaged. Please keep the original package in a safe place for future use.

2-1. Rear panel view

1kVA 2kVA

3kVA

1. Output receptacles

2. AC input

3. Input circuit breaker

4. External battery connection (only available for L model)

5. RS-232 communication port

6. Modem/Phone line/Network surge protection

7. Intelligent slot

2-2. Setup the UPS

Step 1: UPS input connection

Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension

cords.