User manual

6-2-1. Messages menus and classification in submenus
 Use () and () keys to choose between different menus (0.0, 1.0, …, 7.0).
 Use () and ()keys to move inside submenu screens.
Fig. 29. Display messages menus and classification in submenus
6-3. Screen Description
6-3-1. Main level (screen menu 0.0). See Fig. 30
 Screen 0.0: Main presentation screen, with time and date indication.
 Screen 0.1: UPS Status (“UPS:”, 1
st
row) and configuration (‘‘CFG:”, 2
nd
row). In the first row,
there are two fields, first to show general state of the converters, and second to show origin of the
voltage on the output. These two fields are separated by a “ , “:
Possible state of the converters:
- «Shutdown» Rectifier and Inverter stopped or blocked.
- «Start» UPS converters (rectifier and inverter) are starting, but still not ready.
- «Normal» UPS is running in normal mode: mains present, rectifier running, output on inverter.
Loads are protected.
Configuration of the unit, measures calibration, internal parameters
adjustment, …
For Technical Service only
()
()
() () screen 6.0
CONFIGURATION
Password: *****
()
()
() () screen 4.0
AIARMS

Active alarms,
()
()
() () screen 5.0
DATA LOGGER

Last 100 alarms & events occurred can be displayed in this submenu, and also
the status of the unit at that
()
()
() () screen 7.0
RATED VALUES
At user level, inspection of some rated values like input & bypass voltage, input &
bypass margins, DC voltage, output current, charging battery current and battery
probe.
() () screen 0.
Firmware versions, serial number, configurations ..
()
()
MODEL NAME
11:19:35 08/10/2009
()
()
() () screen 3.0
PARAMETERS

Basic parameters programming: date, time, language, communications, …
() () screen 1.0
CONTROL &STATUS
OF THE UNIT 
()
()
Unit Start-up, battery test command
()
()
Measurements: voltages, currents, power, temperatures
() () screen 2.0
MEA SURES
